SPUHR SP-4011 “GAP” mount

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
Anybody using one of these mounts?? It’s the one I want but not sure if it will work with my Steiner T5XI, due to possibly my turret housing hitting the bridge on the bottom side- any help is would be great, also I have a 20 MOA rail on the gun, and I’m using ARC mediums which are basically exactly the same height as this mount.. just throwing that out there
 

Sutherlandsd

Bears. Beets. BattleStar Galactica.
Belligerents
Apr 24, 2013
758
432
69
NE TN
I used one with a athlon Cronus and it was close but it fit between the turrets. Also used it with a Razer gen1 it was also close. I don't think the t5 turrets are bigger than either of those... From what I understand the gen2 Razer won't fit or depending on who you ask will fit but can't use the leveling thing...Maybe call Mile High I know they sell alot of Spuhr mounts.
 
  • Like
Reactions: Lionsbreath

Hollywood 6mm

Major Hide Member
Belligerents
Dec 9, 2013
1,670
988
219
Flori-duh.
I have two of them with XRS2s in them. I'll second the suggestion to call Mile High, as they should be able to tell you about the fit. You could also look at the 4001, which is .079" taller, and might give you the clearance needed if the 4011 is a touch too short.
 
  • Like
Reactions: Lionsbreath

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
Good info, yeah ill call Mile High for sure.. The 4001 is basically 1/16” more height wise, which I’m not against at all, but it doesn’t have that extra clamp screw enabling you to cantilever, and still have 4 clamping screws.. My problem is my scopes are always further forward than everybody else’s and i start running out of rail space.. Maybe I should put a longer rail on it, but I don’t want to, cuz buying the Spuhr is gonna be painful enough🤔
 

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
Arent new extended scope bases cheaper than new scope mounts?

Unless you have an integrated action
Yes.. I’ve wanted a Spuhr for 3 yrs now tho, and in order to make the temptation go away I’m just gonna give in.. I was just hoping how beefy the Spuhr is and how I run my scope, I wouldn’t have to buy both
 

pineoak

Assistant Minion
Belligerents
Feb 15, 2017
1,931
142
69
North Carolina
they make great mounts, but it might be cheaper to run an extended picatinny rail base attached to the action

then you can use the mounts you currently have... but farther forward. unless I'm misunderstanding something

have never used their action/picatinny rail but will in a week or two; their scope mount is great, though $120 Seekins rings hold zero just as well; I like the NF unimounts as well, though like seekins not fast or easy to mount

the ARC M10 & Spuhr just make scope mounting super fast and easy.
 
  • Like
Reactions: Lionsbreath

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
I did talk to Mile High, super good guys.. I’m going with the SP-4001, and apparently all Spur mounts have 5 clamp screws now.. unless they always have 🤷🏼‍♂️ I’m still learning the confusing world of Spuhr
 

pineoak

Assistant Minion
Belligerents
Feb 15, 2017
1,931
142
69
North Carolina
Mine has 6. That one should be easy to resell give the specs on it. Congrats!

(PM me if you don't like it and want to get rid of it cheap) HAHAHA!!!
 

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
Mine has 6. That one should be easy to resell give the specs on it. Congrats!

(PM me if you don't like it and want to get rid of it cheap) HAHAHA!!!
6 screws?? Sweet, these dang Spuhrs have had me so confused. I think I got it figured out tho.. Anyways, I have not ordered one yet, my finger is on the trigger tho.. I was hoping one could pop up in the PX.. I roger what you said in your earlier posts, tho, and I appreciate it
 

pineoak

Assistant Minion
Belligerents
Feb 15, 2017
1,931
142
69
North Carolina
When you do your scope height calculations, leave more than 5 mm

Or more of daylight between the top the roof scope rail or barrel and the bottom of your objective

If using a 56mm, u could always get the 1.35” version too 0/0
 
Last edited:

Lionsbreath

Aim high and send it!
Belligerents
Feb 18, 2017
294
139
49
36
Rockingham, NC
Thanks for that knowledge, I think I’ll be good with the 4001, cuz according to my calculations it’s actually 1/16” higher than my ARC 28mm’s, and I never run scope caps anyway🤦🏼‍♂️
 

VegasHKShooter

Always Learning
Belligerents
Feb 28, 2013
482
326
69
Las Vegas, Nv
You will NOT be disappointed in the Spuhr Mount. I know they are a bit tough to swallow in the beginning, but they are HELL BENT for strong.
Also, with so many torx bolts on them, you really spread out the clamping force. That 25 in lbs is spread out over a larger area.
I have shot my AI in several matches, banged into barricades, it has ridden in backpacks, etc. NEVER a hint at moving or shifting.
When you’re using a $3000 optic on a $4000 rifle, what’s another $400-$450 for a solid, peace of mind mount?

That’s what I tell myself anyway. 😀😀
 

utvolsfan

Private
Belligerents
Aug 25, 2009
53
2
12
North Georgia
Re: Spuhr 4011 will fit a Nightforce ATACR 4-16-42. I know this isn’t what you asked, but with the title, maybe it will help someone else out.

When I bought one I couldn’t find an exact answer, but it will work.
 
  • Like
Reactions: Lionsbreath

Macca

Straya
Belligerents
Apr 18, 2012
229
112
49
47
I’m looking to get one eventually for a Leupold Mk6,i’m sure it will,maybe someone can confirm?
I’ve got two Spuhrs,& whilst I agree on them being bombproof,I don’t think they just look good,rather they (to me at least) are unobtrusive & blend the scope & rifle in such a manner that I don’t even notice them,
 
  • Like
Reactions: Lionsbreath