Accuracy International Picture Thread

Nodakplowboy

Grumpy Gramps
Belligerents
Mar 4, 2017
767
1,170
99
Calm, slightly overcast 10 degree day in Upper Dakota. Good morning for a 200 yd. dot drill. All of my LR rocks are on minimum maintenance roads that have yet to be cleared, so went to the local range.

PC060627.JPG

Rifle worked great, shooter sucked, these old eyes are catching up to me. Tried out a pair of Magpul patrol gloves, think they'll be O.K. after some breaking in. The moving blanket shooting pad is low rent, but sure breaks the frost from cold concrete.

Weather forecast for next week has some minus 0 days in it, hope to get out a few more times before that stuff lands. 10 degrees with little wind is one thing, -10 with a breeze is a new world.

Later.
 

Nik H

Constantly Learning
Online Training Access
Belligerents
Jan 22, 2014
6,953
6,454
219
How do you guys like the flat triggers? I'm thinking of buying one to try it out.
I use it on my competition trigger that is on my AI AT. Love it.

I also tried it on the standard trigger on my AXMC and didn't think it was an improvement
 

tevan0707

Sergeant
Belligerents
Mar 27, 2014
265
291
69
Got to finally put some rounds through my 6.5 AT. Really promising start, the Sig 140SMK did much better then I was expecting. The Barnes 112 Match Burners factory did really well and the Hornady 140ELDM reload I had left over did excellent except for one flier.

1575666613763.png
1575666351879.png
1575666479133.png

Hornady load only looks like a 3 shot group but 4 of the 5 are in the 2 hole cluster and the flier is up top.
 

Rumblingdwarf

Sergeant of the Hide
Belligerents
Minuteman
Aug 19, 2018
114
98
34
SLC...ish
The rumbling dwarf has swapped over to an AI eh? No more Curtis. I feel like everyone I know in Utah is swapping over to AI's...
I shot this AI before my Curtis. I actually bought it near the end of 2015. When the comp trigger came out I went back to it.
 

Crews

Sergeant
Belligerents
May 11, 2017
709
289
69
Yes, it can be removed with no issues. However, you will lose the ability to have a front sling mount, since the QD cups screw into the bipod block.
Regarding removing the bipod block for weight savings but not having QD anymore... a solution is to just get two Teflon insert 0.8x5 nuts as backers. It’s working fine for me so far.

E6F36FE4-DAAA-492B-869B-06B8E0A21C0F.jpegF43837F2-4ED6-425C-9585-E107B60A261B.jpeg
 

bfk4lyfe

Full Member
Online Training Access
Belligerents
Jul 1, 2010
172
28
34
34
Does anyone have a picture of an elite sand ax next to a pale brown one?
 

96C

Sergeant
Belligerents
Aug 9, 2007
844
349
69
Aust
Precision Rifle Series Australia finale.

2018 SFP folder AX308
Comp trigger + flat shoe
MYMag 3D printed magazine base plate
Proof 24" 6.5CM
HRD Gear arca rail
Area419 sidewinder brake
Accuracy 1st bubble
7-35 ATACR T3
GreyOps CNC mag cut AMP
Ckye pod long
Spuhr 4603B

This rifle is solid, does everything you ask - Very happy.

76263813_2506254306288797_7616650876232400896_o.jpg

Factory Hornady 140gr ELD-Match @ 2788fps from the 24" proof. 3 rounds, 100 metres, cold bore with approx 600 rounds since the last good scrub. Normally this ammo sits around .5 MOA, sometimes it gives something special but never blows out. They are exceptional rounds from a box.
ELDM.jpg
 
Last edited:

Claluja

Private
Minuteman
Aug 25, 2019
20
6
6
Anyone have any info on where pressure signs start with IMR 4064 under an SMK 175, in FGM brass, in an AI AX .308? 45 gr or so? Just trying to find out what to expect . . .
 

96C

Sergeant
Belligerents
Aug 9, 2007
844
349
69
Aust
@96C

What's te reason for the MYMAG base plate. Does it give more mag capacity or is it a grip thing?
Just to help with quicker magazine changes. The base plates are welded on the AW magazines. Definitely non-essential, a hangover from pistol shooting. Makes a difference though, worthwhile on one magazine.
 

RS14

Sergeant of the Hide
Online Training Access
Belligerents
May 7, 2019
205
141
49
Panama City Florida
Some better pics. Now I need to get another atlas that can be dedicated to this rifle rather than the Harris.
 

Attachments

Luvman

Full Member
Belligerents
Mar 17, 2003
1,024
292
189
Northern KY
Some better pics. Now I need to get another atlas that can be dedicated to this rifle rather than the Harris.
Is the spigot part of the AT LE package or did you add it on?

I ran across an ad for one a while Back and it also had the Accuracy Obsession spigot.
 

RS14

Sergeant of the Hide
Online Training Access
Belligerents
May 7, 2019
205
141
49
Panama City Florida
Is the spigot part of the AT LE package or did you add it on?

I ran across an ad for one a while Back and it also had the Accuracy Obsession spigot.
I had mile high add it when I placed the order. They currently have them on sale on there website as well.

PRS for sale in the PX.
Im leaning towards a CAL. I have one on another rifle and really enjoying it. But im kinda waiting just to see if anything new is released at shot show. I heard there will be a new Atlas. Just don't know anything about it. Or if its gonna even be anything im interested in. Being I have a CAL on another rifle im not in a big rush to buy anything. I just didn't bother removing it from that gun to put on this gun for the photos. I appreciate the info on the PRS though.
 

BCX

Major Hide Member
Belligerents
Minuteman
Mar 18, 2018
1,069
373
89
School me on the AI chassis. I have never had one in my possession so help me out... Seen a few w AR style pistol grips and was wondering if you just remove the skin? Is it a direct bolt on or a conversion kit? Have my eye on a AI AX chassis for my next build.
 

BLKWLFK9

Just F'n Send It..
Online Training Access
Belligerents
Feb 13, 2017
1,593
1,984
119
School me on the AI chassis. I have never had one in my possession so help me out... Seen a few w AR style pistol grips and was wondering if you just remove the skin? Is it a direct bolt on or a conversion kit? Have my eye on a AI AX chassis for my next build.
Where have you seen different grips on a AI chassis?
 

Huskydriver

You gotta want it....
Belligerents
Minuteman
Apr 17, 2018
2,049
2,534
119
SLC, Utah
School me on the AI chassis. I have never had one in my possession so help me out... Seen a few w AR style pistol grips and was wondering if you just remove the skin? Is it a direct bolt on or a conversion kit? Have my eye on a AI AX chassis for my next build.
It's only on the new axsr and old psr models
 
  • Like
Reactions: BCX

BCX

Major Hide Member
Belligerents
Minuteman
Mar 18, 2018
1,069
373
89
PSR? thought the fore end looked different. ETA on the new AXSR?
 

BCX

Major Hide Member
Belligerents
Minuteman
Mar 18, 2018
1,069
373
89
Thanks.. many different AI models to choose from. ASR is out. Badass rifle tho.
 

samb300

Anarchy Outdoors, Accuracy Obsession
Belligerents
Feb 22, 2013
1,117
1,550
219
Milwaukee, WI
AI showed the ASR factory rifle at Shot Show 2019, along with the R700 (long action?) chassis for drop-in barreled actions. I’m not aware of any pictures or info of the AXSR long-action magnum multi-caliber, other than Mile High and EuroOptic having slots on their website for pre-order of them for $8975.
 
  • Like
Reactions: BCX and BLKWLFK9

mikey geester

Private
Belligerents
May 4, 2014
79
21
34
Yorba Linda California
AI showed the ASR factory rifle at Shot Show 2019, along with the R700 (long action?) chassis for drop-in barreled actions. I’m not aware of any pictures or info of the AXSR long-action magnum multi-caliber, other than Mile High and EuroOptic having slots on their website for pre-order of them for $8975.
From what I understand there will be no short action offering. Only one AX rife from here out. The new AXSR is the “long action” to my knowledge and can also take the new mags that have the same outer dimension as the Long action magnum cartridges but smaller inner dimension for short action cartridges.

I may be incorrect but this is what I gathered from the videos/pictures I’ve seen.

Nothing was mentioned about a short action AXSR was there?
 

blbennett1288

de·plor·a·ble
Belligerents
Apr 24, 2017
1,845
1,221
119
Hoover, Alabama

Batemanb12

Private
Belligerents
Aug 9, 2011
99
84
34
47
St Louis
Anyone know where I can find a Accuracy International AXMC SFP Bolt Assembly Complete, .308 Bolt Face? EuroOptic is out of stock. I would prefer Dark Earth, but not too picky


You might want to check with Milehigh.

 

blbennett1288

de·plor·a·ble
Belligerents
Apr 24, 2017
1,845
1,221
119
Hoover, Alabama