375CT Zero Distance?

Andielouroo

Private
Belligerents
May 10, 2017
301
189
49
Nevada
I have a DT HTI that I’m taking out to sight in tomorrow morning and shoot for the first time. The HTI has a flat top rail, so I mounted the NF 7-35 in a Spuhr 4804 with 6 mils of elevation. I’m planning to shoot this from 1000 to as far as I can find. Just wondering if I should sight in at a distance other than 100.
 
Last edited:

MACHTECH

Machinist
Belligerents
Feb 12, 2017
861
825
99
Michigan
To get the most out of your elevation turret on the 7-35 requires a 15-16 mil mount. I used the ERA-TAC adjustable cant mount to achieve that. Then, with a 100 yard zero you'll have enough elevation to get you out to 2640+ without any holdover on the reticle. Anything beyond that will require using the reticle or going to a Charlie Tarac unit. I think I still have a pic of my old rig I'll try to post.
Screenshot_20190606-052718~2.png
 

equilibrium

Sergeant of the Hide
Belligerents
Minuteman
May 11, 2018
360
350
69
I have about 4mil left on a 30moa integrated rail and 20moa mount with 100yd zero.
 
Last edited:

GIXXER2000

ELR Junkie
Belligerents
Aug 5, 2013
896
174
49
Bullhead City ,AZ
The other way to go is get the IVEY Adjustable scope mount. It goes from 0 to 60 mils. I just got my Cadex Shadow 375CT and plan on a 100 yard zero. I am using a S&B 3X27 35 mil of travel in the scope and it should have about 2 mils left after i zero it. So i will have about 93 mils of come up.IMG_0203.jpeg
 

Andielouroo

Private
Belligerents
May 10, 2017
301
189
49
Nevada
Can anyone give me an idea of what kind of drop (in Mils) i'm looking at out to say 3000 yards from a 100 yard zero? I've been searching around without much luck.

The other problem I'm going to have is that the 6 mil mount I have mounted currently maxes out the cheek rest height on the HTI. If I went to an Ivey mount I wouldn't even be close on cheek weld. I guess that's why the Charlie Tarac unit is potentially a better solution, but at $1200, it ain't cheap.
 

Goin'Hot

Gunny Sergeant
Belligerents
Nov 14, 2008
2,200
10
142
Central, Ohio
Depending on your load... I ran a 330gr Lehigh solid at 3225 through Strelok and come up with 43.5 mils to 3000.
 

Matthew488

Private
Belligerents
Feb 21, 2017
72
28
24
47
Gilbert AZ
I recently received my 375 BAS (Cheytec improved) with a 50moa rail mounted. Also have the 7-35x56 mil-xt and a 20 moa on order. It should give me a 100 yard zero with a slight hold under in the reticle. I figure that will get me out a ways while saving up for the Charlie Tarac.
 

xdeano

Sergeant
Belligerents
Oct 26, 2005
1,031
74
154
39
North Dakota
Can anyone give me an idea of what kind of drop (in Mils) i'm looking at out to say 3000 yards from a 100 yard zero? I've been searching around without much luck.

The other problem I'm going to have is that the 6 mil mount I have mounted currently maxes out the cheek rest height on the HTI. If I went to an Ivey mount I wouldn't even be close on cheek weld. I guess that's why the Charlie Tarac unit is potentially a better solution, but at $1200, it ain't cheap.
Ive got your exact setup, except for the Spuhr mount. Im running an ivey mount with a 7-35 Atacr. I have no problem with the cheek rest on the HTI. In fact I dont have mine adjusted up at all.

I figured that id start with the ivey for 700. If it didnt work out well id go to the Charlie. So far so good. But I also havent shot it past 1600yds.

Xdeano