10rd mags 300 prc

Lindley Machine

Private
Minuteman
Dec 23, 2019
19
5
6
View attachment 7258327.

I built a 300prc, I milled out the magwell and the feed ramp for Lapua length mags, I bought the customer a 5rd mag and he wants an additional 10rd. Does anyone know if they make a 10rd 300wm CIP, or I can us a Lapua mag and bend the lips.
 

OutsideSeth

Private
Minuteman
Feb 28, 2020
1
0
2
Boise, ID
As far as I have been able to tell they are only available in the 5rd capacity. From what I have read the 338 CIP magazine should be able to be used with bent lips for proper feeding. I have seen reference to that in multiple places, but haven't taken the plunge to confirm myself.
 

Lindley Machine

Private
Minuteman
Dec 23, 2019
19
5
6
As far as I have been able to tell they are only available in the 5rd capacity. From what I have read the 338 CIP magazine should be able to be used with bent lips for proper feeding. I have seen reference to that in multiple places, but haven't taken the plunge to confirm myself.
That is what I did and it works well, but I couldn't even find a 338 10 Rd mag.