Announcement

Collapse
No announcement yet.

40X 22 stock

Collapse

728 Ad Widget

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 40X 22 stock

    I would like to put together a shootin, using , lookalike , of a 40X sniper rifle. not a fake or counterfeit. my question is can a 40X 22RF stock be easily modified to 700 Rem. SA ?

  • #2
    Your 40X stock if in good shape likely has a value that makes it not desirable to modify. Even if you did modify it would not be recognizable as an M40.

    Look up Taylor Precision Engineering.

    They are making up a line of black walnut stocks in the original M40 sniper rifle profile and a walnut McMillan HTG style.

    Kyle is a vendor on the Hide...

    Here is a page of his stocks....

    https://taylorprecisioneng.com/t/m40-stocks.

    Here is his latest ad....

    https://forum.snipershide.com/forum/...tocks-for-sale
    Last edited by pmclaine; 09-06-2017, 04:35 PM.
    "...But they would never find anything to beat the old Springfield ...the long sleek streamline, very slim but with potent bulges, all in the just exactly right places to give it that pugnaciously forward-leaning, eager look that marked the Springfield. Beside it, the M1 looked like a fat old man puffing with a lack of training...the two most beautiful things made in America were the ax-handle and the clipper ship? ...they should have added one more thing: The Springfield '03 rifle..."

    Comment


    • #3
      Originally posted by DCB View Post
      I would like to put together a shootin, using , lookalike , of a 40X sniper rifle. not a fake or counterfeit. my question is can a 40X 22RF stock be easily modified to 700 Rem. SA ?
      I have a half dozen or so 40X stocks that you may be able to use as well. They were "project" stocks.

      Email me at kyle@taylorprecisioneng.com if you would like more info.

      Thanks,

      Kyle
      Kyle Taylor
      Taylor Precision Engineering
      www.TaylorPrecisionEng.com
      Facebook: www.facebook.com/taylorprecision/
      Instagram: @taylorprecision

      Comment


      • #4
        Hello Kyle. I have been admiring your stock work over on M40rifle...

        Just out of curiosity, what does a "typical" M40 black walnut stock weigh?

        And, have you done, or are you considering, working on newer generation M40 stocks (like A-3 or A-5) in Walnut? Maybe it's a crazy idea, but I was just thinking out loud a bit.

        Feel free to PM if you like. Maybe a phone call later and we can swap 'woodworking war stories'...
        M40A-1 in process...

        Comment


        • #5
          A Walnut M40A5 stock hmmmm sounds neat

          Kyle if you investigate a wood stock with that sort of wrist/pistol grip be wary of a weakness in the wood.

          Finns had a sniper with similar design...

          th.jpg

          and they were prone to cracking at the grip.

          Im sure caliber matters.

          "...But they would never find anything to beat the old Springfield ...the long sleek streamline, very slim but with potent bulges, all in the just exactly right places to give it that pugnaciously forward-leaning, eager look that marked the Springfield. Beside it, the M1 looked like a fat old man puffing with a lack of training...the two most beautiful things made in America were the ax-handle and the clipper ship? ...they should have added one more thing: The Springfield '03 rifle..."

          Comment


          • #6
            Caliber and grain orientation.

            If it was a "quarter sawn" set up (which would actually be flat sawn due to configuration) and really straight grain, I think it'd hold together. But you are right, that would be a weak point... talk about scope "eyebrow"... damn. That one might be permanent!

            if the grain is straight and running top to bottom it has the best chance of survival. Grain running across, side to side, and it will be more prone to failure.

            Downside is The wood will move left to right if it does at all, whereas flat sawn will move up and down if it does. Depending on how much barrel relief you have, contact could happen.

            You could also also do a laminate with a sugar maple core and black walnut on either side. I'd still orient the grain top to bottom. Maybe some blood wood veneer for color in between.

            I did a few solid quarter sawn (bolt on) necks and all my neck-thru body ones were laminated quarter sawn sugar maple ironically with black walnut veneers at the glue lines (mainly for appearance) and those are very stable. But I also air dried my boards after they were kiln dried, and the glued up blanks were also allowed to age at least a half year before moving on to more work.
            M40A-1 in process...

            Comment

            Working...
            X