Rimfire Rifle Photos Thread

R3DN3CK

Sergeant of the Hide
Nov 25, 2012
8
3
3
ND
I recently finished my dedicated 22lr upper receiver to mimic my .223 they both shoot tacks and i couldn't be happier with how it turned out
Aero precision upper
Midwest industried keymod handguard
JP enterprises bolt and 18" match barrel
Rise Armament 3.5 flat blade trigger
vortex crossfire II with burris PEPR mount
Bettermag 15-22 magazine adapter
rpr stock
zja59tpgtpe01.jpg
 
Jan 2, 2018
151
56
28
My fun rifle, CZ 455 with boyds stock, bedded, pillared, oversize knob, EGW 0 Moa base, SWFA 3-15 FFP. Works great for the local 35-200yd monthly steel match.

Old paint scheme over a OD green cerakote base. Didn't like so wiped it off with acetone and elbow grease, want to do a true to era vietnam horizontal tiger stripe pattern next.
 

heartburn

New Hide Member
Feb 16, 2018
29
8
3
KIDD_1.jpg

KIDD receiver, KIDD two-stage trigger, KIDD spiral fluted barrel. PA 4-14x40 and knock-off harris. So far with about 150 rounds of assorted SV down it I am starting to see some progress in the groups. Same rifle had a GM barrel in it before and was an MOA rifle @ 50 but when KIDD released the spiral barrel I really wanted one. GM barrel just means there will have to be another rifle built at some point.

Lot's of really nice rifles in this thread, hope mine fits in and hopefully post up some targets soon.
 

FatBoy

Chris Hayes, Nashville TN
Jul 29, 2001
935
369
63
45
Nashville, Tennessee
1903 Low Serial Number receiver with custom insert for M22 mags, M2 bolt.

Douglas Barrel, 16 twist
Timney 1903 trigger group
Minelli S.P.A Walnut stock w/USGI Hardware - final inletting bedding done with barreled action
Earle mounts

scope was a loaner, but will wear a 16 or 20x 1.5" calibrated head Unertl.

Lots of hand fitting and adjusting to get it right. This is no ISO9000 affair, but I love it. Only 7 of these are being made, split between single shot. 20180328_184824-327x981.jpg
 
Last edited:
Feb 18, 2017
11
10
3
My CZ 455 just landed. Varmint PT 16.5"
Thinking Vortex PST Gen 2 scope for this one. Also thinking of changing the stock up a little. Maybe brown base instead of green, with black, tan and white for camo... Just so it's a little more unique.
 
Likes: DXT_Shooter

Lawless

New Hide Member
Feb 11, 2018
22
23
3
NC
Kidd receiver and 20moa rail
Kidd 16.5" threaded barrel.
Kidd threaded pins, take down screw and Vblock
Kidd trigger in factory housing (2lb)
Kidd bolt, charging handle and spring
Boyds ProVarmint with steel bedding block and pillar.
PA 4-16FFP mil/mil












 
Feb 18, 2017
11
10
3
Well, the day after I got the CZ 455 I decided to work on the paint job. I love the stock, hated the look... So I went with a brown camo base (flat brown rusto) and dabbed some tan, black, white, grey and brown/orange on top... followed by 3 coats of matte clear (it's a little reflective, but at the range I don't have to worry about actually being camouflaged)



 

Frankly

Sergeant of the Hide
Jan 27, 2018
490
271
63
Spencerport, NY
Beware of ukulele cases at Burning Man, Man.

20180424_ruger1022backpackerriflegun_0519.jpg

Ruger 10/22 Takedown in a Magpul backpacker stock inside a cheap eBay case. Buttstock holds a couple magazines or a mag and a 50 box of ammo. I don't use it much but I like it for what it is. Magpul's mass market engineering continues to impress me. Ruger continues to unimpress me but I'll be damned if I'll spend $1500 on a 10/22. (I did upgrade the trigger and shock buff thing.)

20180424_ruger1022backpackerriflegun_0517.jpg 20180424_ruger1022backpackerriflegun_0518.jpg

Would love to find a convenient way to put a fiber optic sight up front but so far everything seems like a PITA. It's a fun plinker and when the Zombiocrats take over I can hunt wabbits.
 
Last edited:
Likes: Danilo

AMGtuned

Sergeant of the Hide
May 6, 2018
208
97
28
Warren, ME
Here's mine. Ruger 77/22, Boyds Tacticool laminate, StraightJacket barrel system, Nikon 4-12, added flush cups (pretty sure I found the idea here), badger bolt knob, bolt shim, tuned trigger. Shoots like a dream 20170520_182452.jpg 20170520_182436.jpg 20170520_190205.jpg
 
Last edited:
Oct 20, 2011
81
4
8
43
Spokane
Sweet sticks in this thread.

Savage FVSR in my home brew chassis. Rail was nordic small diameter in the pic, but it wears a carbon fiber tube now. Ya know, cause the carbon fiber makes me shoot better, lol.
 

dirthead1

I Like BBQ
Feb 11, 2017
983
86
28
Phoenix, AZ
Here is my CZ 455. It started as a varmint model. I did all the upgrade work myself.

Boyd's stock, pillar and glass bedded with Krylon camo sponge paint
Lilja 16.75" barrel
DIP bottom metal and steel mag box
Yo Dave trigger kit
Area 419 rail, trimmed a bit shorter for the S&B Ultra Short
Armor Black Cerakote
Anarchy Outdoors bolt handle
PTG round bolt knob
Triad Tactical stock pack

IMG_3182.JPG IMG_3183.JPG IMG_3184.JPG IMG_3185.JPG
 

MPrimo

Sergeant
Nov 17, 2011
435
13
18
53
Orange, CT
Ruger receiver ... everything else mechanical is from Kidd including 18" stainless barrel. Two stage trigger is simply amazing. Scope is an Athlon Ares BTR in Seekins rings. Aerosol DuraCoat OD green on all metal. Chassis is the new McRees. Shoots amazing and runs 100%. Group pic is at 100 yards ... no wind this morning so it went really well. I have a tricked out CZ 455 with a Lilja barrel too and this thing easily shoots as well.




Rifle in the back is a TRG in 6.5 Creedmoor built by SAC ...
 

lou400a

Sergeant
Feb 27, 2008
351
34
28
SE Florida
Here's my CZ 452 22lr. After installing Cronus 4.5-29x56 on EGW HD 20 moa with 34mm Seekings low rings I couldn't see through the scope without raising my cheek off the stock so I've installed LRI's cheek riser (found in classifieds) to remedy the problem. It turned out great for a garage hack and a 1/2 days work.

1A5BF1C6-93D4-49B9-9BF3-33CE3B61A123.jpeg

7A4EC0BC-022C-4CEA-A24D-AE1D6F23CAB8.jpeg
 
Aug 6, 2017
61
3
8
Here's my CZ 452 22lr. After installing Cronus 4.5-29x56 on EGW HD 20 moa with 34mm Seekings low rings I couldn't see through the scope without raising my cheek off the stock so I've installed LRI's cheek riser (found in classifieds) to remedy the problem. It turned out great for a garage hack and a 1/2 days work.

View attachment 6909429

View attachment 6909430
How did you cut the stock ?