Price Drop - R700 300 RUM Build, MDT HS3 Chassis - Reloading Gear Added!!

Oct 30, 2017
25
2
3
Capon Bridge WV
#1
Up for sale, Remington 700 300RUM barreled action sitting in MDT Chassis

**ADDED RELOADING EQUIPMENT APPROX VALUE $5-$600**

Details:
Barreled Action
  • R700 ADL long action, has notch cut into top of receiver in front of rear screws, does not interfere with base mounting
  • ~25" Heavy taper SS barrel, Straight Taper to 1.020" at end of muzzle brake
  • .25" Recoil lug
  • Custom muzzle brake - a baby to shoot, my 57 lb 10 yr old has shot this with ease
  • Timney 510 trigger
  • Badger 20 MOA rail
  • ~250 rounds through it
Chassis
  • MDT HS3 Chassis - FDE panels
  • MDT Skeleton Buttstock -FDE
  • Ergo grip
  • MDT Night vision hood - not pictured but new
  • 2 - 300 WM 3.715" magazines - currently not using due to RUM length, I'm single shooting
  • 6" Pic. Rail on bottom of chassis
The Good:
  • This barrel will shoot, practically zero load development, 2nd 3 shot group after receiving produced .167" 3 shot @ 100 yds
  • Loaded 20 more and it grouped .232" minus cold bore, a tick over .5" including cold bore,
  • Ran some numbers and took it out to 1140 yds with ease,
  • Shooting the 215 Hybrids @ 3035 very good, previous owner stated he shot up to 230's with good results
The not so great:
  • I have very little information on the barreled action, I bought it off the hide in November from another member whom lost all details from previous posts due to the changing forums. He wasn't sure of barrel maker or twist. I checked twist and came up with 10"
  • Previous owner reported less than 200 rounds, I have shot less than 50 rounds, Saying ~250 total rounds shot
  • I believe the action is trued but I cannot guarantee it
  • 1 or 2 of the screws on the chassis panels have a little bit of rounded edges on the hex from previous owner (I bought chassis separately) nothing major just want to be up front, they still work fine, i can replace with new if necessary
Reloading Gear:
  • Redding Comp 3 Die Bushing Set, ( comes in 2 non-factory boxes, see pics)
    • Micro Bushing Neck Die, Micro Seating Die, Body die
    • .336 & .338 Titanium Nitride Bushings
  • 63 pcs Rem brass, some 1x fired, some 2-3x fired
  • 50 pcs Nosler Brass- 36 currently loaded in new and 1x fired brass with 215 Berger Hybrids, only 20-25 have been 1x fired
    • have to check on shipping loaded rounds...
  • 109 - Berger 215 Hybrids
  • 52 - Hornday 225 BTP Match
Not included
  • Scope
  • Rings
  • Bipod or rail adapter for bipod
Reason for selling is I have 2 other dedicated bench rifles and I am wanting a lighter weight hunting rifle for an upcoming mule deer hunt, so something has to go...

Only trades I may be interested in would be a lighter weight scope for hunting, like the looks of the Conquest V6 3-18... something under 30 ozs preferably

Sale price $2000 + shipping to your FFL, must accept from individual, accept PayPal F&F or add 3.5% for fees

can send other pics if requested via text, 5 four 0-five 33-nine 6 three 0

IMG_0283.JPG IMG_0284.JPG IMG_0285.JPG IMG_0286.JPG IMG_0294.JPG IMG_0295.JPG IMG_0290.JPG
 

Attachments

Last edited: