Precision Rifles.....show em!!

Sep 26, 2017
6
3
3
CBAE3853-FFE0-4FBA-B17D-68711C270AEB.jpeg
Remington 700 LA receiver.
26” Bartlein 1:10 barrel chambered in 300wm
Mdt tac21 chassis.
MDT skeleton stock
Timney 2 stage trigger
PTG bolt mini m16 extractor
Kahntrol hexmod muzzle brake
Atlas 5h bipod
Nightforce 20moa ultralight rail
Nightforce 7-35 FFP atacr
Venom defense grip.
Gunsmith work by Randall at AR15BARRELS
This is my first bolt gun I pieced together and had built. Trying to get into long range shooting. Going to try it out for the first time within a week or two.
 
May 26, 2017
19
4
3
Everson, Wa.
Savage SA
PTG bolt head
24" Shilen 1:12 barrel in .20 PPC
NSS nut and lug
Manners folder
CDI bottom metal
Patriot Valley BR/Dasher mag kit
Atlas BT10-LW17
Warne steel rail
AI mount
S&B 5-25 PMII

Group is 10 shots. The first clean bore shot was left, second was just high, the rest made the dot disappear and this is while fireforming 220 Russian brass to PPC!
 

Attachments

Jul 6, 2011
192
83
28
40
FINLAND
Savage SA
PTG bolt head
24" Shilen 1:12 barrel in .20 PPC
NSS nut and lug
Manners folder
CDI bottom metal
Patriot Valley BR/Dasher mag kit
Atlas BT10-LW17
Warne steel rail
AI mount
S&B 5-25 PMII

Group is 10 shots. The first clean bore shot was left, second was just high, the rest made the dot disappear and this is while fireforming 220 Russian brass to PPC!
What supressor you do use?
Not seem to be Swedish, because it so short, is it Ase Utra?
 
Apr 8, 2013
46
26
18
Remington 700 short mag action - machine work done by APR
28" Bartlein #9 contour 1:8 twist in 7 rSAUM
XLR Element chassis
Trigger tech special
Atlas Bipod
Accurate Mag WSM Magazines
Seekins Precision base and rings
Vortex Viper PST Gen II 5-25x50 mil/mil
SilencerCo Omega break and suppressor
Shooting 180 ELD-Match hand loads


Here she is right after assembly
new rifle.jpg
At the range with the can on
new with supressor.jpg
5 round groups @ 300 yards off of bipod and rear bag. Light wind at my back 70 degrees. Best was .68"
@300.jpg
The average @ 100 has been right at .25" best was .17"
@100.jpg
 

G17C

Private
Feb 17, 2012
100
27
28
64
NH


Trued 700 short action (.308 Winchester) with tig-welded bolt
Bartlein 1-10 5R, 23 inches
Cerakote Sig Grey
Timney 510 set to 3.0 lbs.
McMillan A5 with DIY cheek riser
BO M5 Enhanced bottom metal
BO 20 MOA steel base (bedded)
Seekins low rings
SWFA 10X42 HD with zero stop shims and Holland level

Not many rounds through it yet but it's holding around .3 MOA with GMM 175.
 
Last edited:

TurboTapin

New Hide Member
Feb 19, 2018
7
4
3
Here's mine.

Pillar bedded B&C A5 Stock
Trued Rem 700 SA
Lilja Heavy 308 24" .342nk 1:10 Barrel
Timney 510 @ 1.5Lb's
Kwik Klip Bottom Metal
Talley 20MOA Base
ATRS Rings
Athlon Cronus BTR
F-Atlas Bipod.
 
Last edited:
Likes: Wyzrd

ccoker

Gunny Sergeant
Jul 2, 2008
1,180
12
38
Central Texas
www.tacticalgunreview.com
Two of my babies..
Up front:
Hunting rifle, just finished up and tested yesterday

Tikka CTR 308 16"
Crux Nemesis 30
McMillan carbon Game Hunter - Desert Ambush
Mountain Tactical bottom metal - AICS
Steiner Tactical 3-15 in Talley mediums

Southern Precision Rifles 6.5 Creedmoor
Defiant Deviant Tactical action
Mueller Rifleworks 22" barrel
Crux Archangel
Huber trigger
Badger bottom metal
McMillan A5A - McMillan camo
Nightforce ACTAR 5-25 F1 Mil-C in Nightforce rings



 

Dthomas3523

Blind Squirrel
Jan 31, 2018
1,168
338
83
South Texas
Here she is, pretty much all done (ignore the the scope alignment in the pic, it was just tossed in he mount at the time) except a strap on cheek rest to get it perfect. The groups are with 168 and 175 FGMM. I pulled one of the 168's :rolleyes:

Top group pic is a box test with 175s. Shot(1st shot of group), then moved 2mil up(shot), 2mil left (shot), 2mil down (shot) 2 mil right.....then shot 2 back at zero to finish that group. I still need to talk target test and such, but thus far, the AMG definitely returns to zero dead nuts. Off bench with bipod and rear bag.


Gap Thunder Ranch
Spuhr 3601
Vortex Razor AMG (original EBR-7 mil)
Atlas Cal Bipod

IMG_3858.jpg

IMG_3871.jpg

IMG_3868.jpg

IMG_3869.jpg
 
Last edited:
Jul 6, 2011
192
83
28
40
FINLAND
Here she is, pretty much all done (ignore the the scope alignment in the pic, it was just tossed in he mount at the time) except a strap on cheek rest to get it perfect. The groups are with 168 and 175 FGMM. I pulled one of the 168's :rolleyes:

Top group pic is a box test with 175s. Shot(1st shot of group), then moved 2mil up(shot), 2mil left (shot), 2mil down (shot) 2 mil right.....then shot 2 back at zero to finish that group. I still need to talk target test and such, but thus far, the AMG definitely returns to zero dead nuts. Off bench with bipod and rear bag.


Gap Thunder Ranch
Spuhr 3601
Vortex Razor AMG (original EBR-7 mil)
Atlas Cal Bipod

View attachment 6898857

View attachment 6898860

View attachment 6898858

View attachment 6898859
Is that new model from Atlas?
I have not seen that before.
Looks very nice, mix of Atlas&Harris.
 

jram

New Hide Member
Mar 27, 2018
62
19
8
Saginaw, TX
Here’s mine. I put it together myself, it shoots 3/8 - 1/2 moa and I’m proud of it! Posted pics of the typical 5 shot groups.

It’s a PTG trued Rem 700 action with a one piece ptg bolt. It’s a remage setup with a McCrees 6mm creedmoor barrel.

-XLR Envy chassis (tl3 inlet because of the bolt handle)
-Atlas PSR
-bushnell XRS II
-seekins scope base
-badger rings
-shortened badger maximized recoil lug
-hellfire muzzle break
-trigger tech primary
-Tubb speed lock w/ duo spring


D189C3DA-85E9-45D5-B6BE-3C6AFCC5506D.jpeg
906054C0-2910-4009-8C67-FEEB6ED7A565.jpeg 3C28B579-2181-48E1-95A5-FDD0C46A6E9A.jpeg
 
Dec 19, 2017
4
13
3
Austin, Tx
So I've been lurking around the forum as a guest for the past 4 or 5 years. Did a lot of reading and learning. Got into the precision rifle game about two years ago now, started with a Remington 700 SPS Tactical. Shot it a lot and got into reloading to cut cost (shoot more) and squeeze some more accuracy out of the rifle. Slowly upgrading equipment as the funds became available. Now that I finally have something worthy for the forum, here she is: 700 SA .308, 20" barrel, Bushnell 10x, KRG Bravo Chassis. Harris in the mail and pre-ordered Geissele Super 700, hopefully ships sometime this summer.

20171218_172251.jpg
 

jaysoncraig

New Hide Member
May 8, 2018
7
2
3

DT SRS Covert
16" .308 barrel
NF ATACR moa
Desert Tech tapered 30moa rings w/ bubble level
Cadex bipod
Desert Tech .30 brake

Shot a couple .3moa groups last weekend. Its got more in her though. I don't shoot that well.
 
Feb 10, 2017
437
81
28
24
Tuscaloosa, AL
So I've been lurking around the forum as a guest for the past 4 or 5 years. Did a lot of reading and learning. Got into the precision rifle game about two years ago now, started with a Remington 700 SPS Tactical. Shot it a lot and got into reloading to cut cost (shoot more) and squeeze some more accuracy out of the rifle. Slowly upgrading equipment as the funds became available. Now that I finally have something worthy for the forum, here she is: 700 SA .308, 20" barrel, Bushnell 10x, KRG Bravo Chassis. Harris in the mail and pre-ordered Geissele Super 700, hopefully ships sometime this summer.

View attachment 6902442
Thats an awesome paint job! Details of your process?
 
Dec 19, 2017
4
13
3
Austin, Tx
Thats an awesome paint job! Details of your process?
Thank you! This is my favorite patterning I've ever done.

So I had to play around with this a bit to get the look I wanted. Base coat of alternating Krylon khaki and sand (6" long sections down the length of the rifle).

20171215_163503.jpg

Then took strips of burlap that I cut and frayed and wrapped them around the rifle. Sprayed in brown, khaki, and a little od green to fill the gaps between strips but also bleed through the openings in the burlap to get that kind of checkered look. At my discretion just kind of went and re-wrapped a few sections and did that same process again to increase the complexity of the pattern there.

20171216_171918.jpg

Sorry to hijack! Carry on...
 

Old Dude

New Hide Member
May 12, 2018
17
4
3
Just bought this a few weeks ago
Stock Rem 700 action and barrel 300 win mag
Trigger looks like its stock but he has no creep or overtravel about 3 pound crisp break
Precision Armament M11 brake which works awesome
AI chassis with Harris bipod.
AI 20moa rail
Vortex Viper FFP 6x24x50 in Vortek rings

So far I'm shooting new Hornady brass, Hornady 208 bullets, CCI mag primers and H1000 powder.
This is my first Bolt gun and already Im loving it. IMG_3055.jpg
 
Likes: BabypoopFAL

CBDR

Sergeant
Mar 4, 2017
223
28
28
Jacksonville FL.
Big shout out to Joe Ducos for making a great stock into an amazing stock. She shoots as good as she looks, but I wish I had more time to take this little lady out for a good time and do some finger banging. View attachment 6903733 View attachment 6903734
Please forward me a closer pic of your fwd rail system and brand. I am looking for options to a Badger EFR part # 306-59. Finding a local smith (Jax- FL) willing to take on a milling a T7 Manners is becoming a challenge. Thank you sir
 
Top Bottom