Pic turned out terrible.
Surgeon Scalpel barreled action .308
Vortex Razor AMG
KRG Bravo
Vortex rings (until I swap for a Spuhr)
Surgeon Scalpel barreled action .308
Vortex Razor AMG
KRG Bravo
Vortex rings (until I swap for a Spuhr)
Likes:
stereo.pete
My 300 Norma barreled action arrived from Bugholes today:
Bartlein 28” heavy varmint 1:9 twist, Fat Bastard brake
Defiance Deviant Tactical action
Timney 510 trigger
MDT LSS Gen II
XLR Extreme butt stock & folder
Vortex Razor Gen II
I’m hoping to load some rounds tomorrow night so I can take it out Saturday. Greg sent me a fired casing so I can get the sizing right the first time.
Bartlein 28” heavy varmint 1:9 twist, Fat Bastard brake
Defiance Deviant Tactical action
Timney 510 trigger
MDT LSS Gen II
XLR Extreme butt stock & folder
Vortex Razor Gen II
I’m hoping to load some rounds tomorrow night so I can take it out Saturday. Greg sent me a fired casing so I can get the sizing right the first time.
Likes:
stereo.pete
Oldie but gooddie. (It’s Sold, plans in for new build)
Howa 1500 .308 24” HB in B&C medalist Stock. (Sidewalls of front cut of, new texture added)
Roedale break
Falcon Optics 5.5 x 25 x 50
Eagle stockpac
Bipod
Duracote by myself. OD green, FDE
Everything else std.
Did it Well with 168gr Lapua Scenar to 600 meters
Howa 1500 .308 24” HB in B&C medalist Stock. (Sidewalls of front cut of, new texture added)
Roedale break
Falcon Optics 5.5 x 25 x 50
Eagle stockpac
Bipod
Duracote by myself. OD green, FDE
Everything else std.
Did it Well with 168gr Lapua Scenar to 600 meters
Likes:
stereo.pete
My 3 favorite rifles.
GAP Templar 6.5 Creedmoor
GAP Tempest 6mm Creedmoor
GAP built Remmy 700 308
GAP Templar 6.5 Creedmoor
GAP Tempest 6mm Creedmoor
GAP built Remmy 700 308
Attachments
Likes:
Lunchbox27
Accurate Ordnance build: Long wait, worth it. Stiller tac 30 in 6.5 cm. Brux 20", Manners carbon fiber, TT 3 x 15m. Half inch MOA easy. Total weight = nine lbs. Extremely handy in tight places.
Likes:
PFG and stereo.pete
I'll get this thread started again
26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory
Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings
26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory
Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings
Yup, guess I wasn't drinking coffee when I put it on. Now let's get back on track. Here's the budget 223 wearing a new suit.
Likes:
stereo.pete and Basher
Accurate Ordnance 6.5 Creedmoor rifle - actual build time was about 3 three weeks. Purchase vendors are shown in parenthesis. Pics aren't great but wanted to share as this rifle is a tack driver. Best group is .26 MOA at 1200 yards!
The rifle specs are the following (including optic):
Manners T4- in midnight camo (purchased used from this site)
Defiance Deviant action (purchased from Core Shooting Solutions)
Brux barrel, 1-8 twist, M24 profile finished at 26 inches (bugholes.com)
Cerakote barrel and action midnight black (Accurate Ordnance)
Area 419 Hellfire break (supplied by Accurate Ordnance)
Trigger Tech Diamond trigger (supplied by Accurate Ordnance)
Harris Bipod (from another rifle)
Nightforce 7-35 with Tremor 3 reticle (purchased from a friend) sitting in a Spuhr mount (Mile High Shooting)
The rifle specs are the following (including optic):
Manners T4- in midnight camo (purchased used from this site)
Defiance Deviant action (purchased from Core Shooting Solutions)
Brux barrel, 1-8 twist, M24 profile finished at 26 inches (bugholes.com)
Cerakote barrel and action midnight black (Accurate Ordnance)
Area 419 Hellfire break (supplied by Accurate Ordnance)
Trigger Tech Diamond trigger (supplied by Accurate Ordnance)
Harris Bipod (from another rifle)
Nightforce 7-35 with Tremor 3 reticle (purchased from a friend) sitting in a Spuhr mount (Mile High Shooting)
Attachments
Likes:
stereo.pete and DXT_Shooter
First outing for my first custom build...
Accurised Rem 700 by Spartan Precison Rifles
McMillan Carbon A5 Ambush
Proof research 24” Sendero
Spartan custom bottom metal
Spartan Kopis muzzle brake
Bix n Andy Marksman trigger
Swarovski Z8i scope
Tier One Unimounts
Spartan Javelin Carbon bipod (by me!)
Chambered in 6.5 Creedmoor
Absolute tack driver.... beyond pleased 😁
Accurised Rem 700 by Spartan Precison Rifles
McMillan Carbon A5 Ambush
Proof research 24” Sendero
Spartan custom bottom metal
Spartan Kopis muzzle brake
Bix n Andy Marksman trigger
Swarovski Z8i scope
Tier One Unimounts
Spartan Javelin Carbon bipod (by me!)
Chambered in 6.5 Creedmoor
Absolute tack driver.... beyond pleased 😁
My first foray into bolt-action. Been meaning to for a while then I found a great deal on this along with the $100 Remington rebate. Scope was cannibalized from another rifle for the time-being.
Remmington 700 SA .308
5R 1:10 22" barrel
Schmidt & Bender 3-20X50 H2CMR
Magpul stock
Surefire Brake
Badger rings/mount
Timney Calvin Elite 2-stage
Harris bipod
Remmington 700 SA .308
5R 1:10 22" barrel
Schmidt & Bender 3-20X50 H2CMR
Magpul stock
Surefire Brake
Badger rings/mount
Timney Calvin Elite 2-stage
Harris bipod
Last edited:
Likes:
stereo.pete
Certainly not a precision rifle or anything to really write home about. It's my first venture into bolt guns besides hunting rifles.
Mostly factory Remington 700 Tactical in .308
KRG Bravo
Harris BRMS
Weaver 0MOA rail
Warne QD rings
Burris Fullfield E1 4.5-14
My best group so far has been .19 MOA but it consistently shoots at or around .5 MOA with 168gr Federal Gold Metal Match.
I'd like to upgrade the optic, but having 3 kids tends to put the squash on that kind of stuff haha.
Mostly factory Remington 700 Tactical in .308
KRG Bravo
Harris BRMS
Weaver 0MOA rail
Warne QD rings
Burris Fullfield E1 4.5-14
My best group so far has been .19 MOA but it consistently shoots at or around .5 MOA with 168gr Federal Gold Metal Match.
I'd like to upgrade the optic, but having 3 kids tends to put the squash on that kind of stuff haha.
My buddy just bought a Tikka CTR in .308. Right out of the box it was shooting .38" groups. I've been trying to talk him into the Bravo as well. The CTR is an awesome rifle.
Likes:
OG10 and DXT_Shooter
Started Life as a Remington 700 Long Range, 300 win mag 26"
Accuracy international AICS AT 2.0 with thumbhole stock sides.
Atlas AI mounting Spigot
Atlas BT10NC Bipod
Vortex Razor HD Gen 1 5-20x50
Nightforce 20 Moa extreme duty steel base
Vortex 35mm precision matched rings
Jewell Trigger
Thunderbeast Arms Co. 30CB muzzle break
Magpul MS4 Dual QD sling
Accuracy international AICS AT 2.0 with thumbhole stock sides.
Atlas AI mounting Spigot
Atlas BT10NC Bipod
Vortex Razor HD Gen 1 5-20x50
Nightforce 20 Moa extreme duty steel base
Vortex 35mm precision matched rings
Jewell Trigger
Thunderbeast Arms Co. 30CB muzzle break
Magpul MS4 Dual QD sling
