NEW - Atlas CAL (Cant and Loc) Bipod - PRE-ORDER (added 12.14)

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#51
I sincerely apologize for failing to post this is a pre-order. I totally forgot to add that in original post, forgive me.

You will be charged at time of placing the order, we did it this way and will do it this same way in future to eliminate issues associated with the way we previously did these orders.

These parts are at metal finishers and the plan is to ship ASAP hopefully before SHOT. Our normal stated shipping timeline is 2-3 weeks, so we should be shipping within that timeline.

So, if you ordered and this is not acceptable, I fully understand, please contact us Customer Service at customerservice@accu-shot.com and we'll give you a full refund.

Again, I apologize.
 

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#52
diverdon - As noted above, I forgot several things! There are several new products found on the page that link takes you to.
grinnergetter - I'll check PM's

Mute - As far as having at SHOT, we will satisfy SH orders first, if there are any left then yes we'll have some.
 

HoustonB77

Online Training Member
Jan 28, 2014
509
91
28
Nixon TX
#53
I sincerely apologize for failing to post this is a pre-order. I totally forgot to add that in original post, forgive me.

You will be charged at time of placing the order, we did it this way and will do it this same way in future to eliminate issues associated with the way we previously did these orders.

These parts are at metal finishers and the plan is to ship ASAP hopefully before SHOT. Our normal stated shipping timeline is 2-3 weeks, so we should be shipping within that timeline.

So, if you ordered and this is not acceptable, I fully understand, please contact us Customer Service at customerservice@accu-shot.com and we'll give you a full refund.

Again, I apologize.
Thanks Kasey. Around Shot will work for me. :)

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#58
HoustonB77 - Thank you, I totally dropped the ball. The Metal Finishers had a pump go out on the hard anodize line....so now we are expecting some of the parts tomorrow. Of course SHOT is staring us in the face and there's some prep we need to do for that. LOL

grinnergetter - You are welcome and Thank you!

GIXXER2000 - We are in booth 20135 in LE ballroom.

M77 - They are non-rotating of the PSR design.

Please note, there is now a news letter option through our website, if you have signed up, thank you. If not, we will be using that system for updates/information as well.

ALSO, we will be shipping these first come first served however we also utilized the newsletter for this release which muddied the waters. So, I should have asked you guys to put "SH" in notes section on order but failed to do that too! SOOOO to insure you get yours first, IF you ordered already, please send email to; shipping@accu-shot.com in the subject put- "SH - Order number XXXXXXX" (replace X's with actual number). We will ship these first. Sorry for the trouble, we'll get this process all smoothed out, never! LOL
 

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#61
"In the words of the great Click & Clack brothers, I tried to obfuscate and declarify as much as possible!" LOL! That explains my life right now without the intent!
 
Dec 23, 2008
1,639
103
63
ohio
#62
kasey this looks like a win for sure. this will bring me back to atlas I believe. I like everything it has including the non pan. ive shot movers for years and never found a panning bipod to make a shit of difference on engagement speed and rather didn't like having a bipod off square of my position causing recoil to not track through the shot. the pod loc is classy choice as well!
 

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#68
First, thank you for the response, it's humbling.

Killswitch Engage, thanks, I hope the CAL gets you back!

Gamewarden, yes, thanks for reminding me to verify, the RRS - BTC PRO does fit the NC version CAL.

We are scrambling here getting ready for SHOT so last call - IF YOU ORDERED ALREADY PLEASE SEND EMAIL TO: shipping@accu-shot.com in the subject put- "SH - Order number XXXXXXX" (replace X's with actual number). This will confirm SH orders and we will ship these first.

IF you are placing an order, PLEASE add SH MEMBER to note section.

We have the last few parts here today to complete the first production run and will satisfy as many SH members CONFIRMED (see above) orders as possible less what is allocated to take to SHOT for demo.
 
Likes: M8541Reaper
Feb 7, 2013
2,250
593
113
The West
#71
First, thank you for the response, it's humbling.

Killswitch Engage, thanks, I hope the CAL gets you back!

Gamewarden, yes, thanks for reminding me to verify, the RRS - BTC PRO does fit the NC version CAL.

We are scrambling here getting ready for SHOT so last call - IF YOU ORDERED ALREADY PLEASE SEND EMAIL TO: shipping@accu-shot.com in the subject put- "SH - Order number XXXXXXX" (replace X's with actual number). This will confirm SH orders and we will ship these first.

IF you are placing an order, PLEASE add SH MEMBER to note section.

We have the last few parts here today to complete the first production run and will satisfy as many SH members CONFIRMED (see above) orders as possible less what is allocated to take to SHOT for demo.
I know you most-likely already left for Shot.. but is the foot print like the PSR, 5 or in between and does it share the legs and accessories with the PSR line or 5?
 

LawnMM

Harbinger of Sarcasm
Jul 5, 2009
1,767
170
63
Colorado
www.accuracy-tech.com
#74
Crap! I should've been following this thread, I didn't write that I was an SH member in my order. Oh well, guess ill just have to be patient.
You could always try reading what's already here...

ALSO, we will be shipping these first come first served however we also utilized the newsletter for this release which muddied the waters. So, I should have asked you guys to put "SH" in notes section on order but failed to do that too! SOOOO to insure you get yours first, IF you ordered already, please send email to; shipping@accu-shot.com in the subject put- "SH - Order number XXXXXXX" (replace X's with actual number). We will ship these first. Sorry for the trouble, we'll get this process all smoothed out, never! LOL
 
Likes: Gil P.

Kasey

Gunny Sergeant
Apr 3, 2003
1,235
207
63
www.accu-shot.com
#76
Hey we just rolled into Gallup and I was happy to see the forum back up! Good job Lowlight!!
The production got pushed back, should have the parts next week and assembled. Lord willing I'll be back on 30-31 Jan and will inspect/approve release. I'll have a couple at SHOT and no they will not be for sale.
The CAL uses v8 and PSR accessories. Has a wider footprint that either I believe.
 
Likes: M8541Reaper
Feb 7, 2013
2,250
593
113
The West
#77
Hey we just rolled into Gallup and I was happy to see the forum back up! Good job Lowlight!!
The production got pushed back, should have the parts next week and assembled. Lord willing I'll be back on 30-31 Jan and will inspect/approve release. I'll have a couple at SHOT and no they will not be for sale.
The CAL uses v8 and PSR accessories. Has a wider footprint that either I believe.
Thanks Kasey ordered one :)

This has to be a crazy month for you, thanks for taking the time and getting back so quickly!
 

Bilc0

New Hide Member
Jan 22, 2018
7
1
3
#78
Little late to the party, I too did not see the instructions to add SH handle to the notes. Email sent though. Ordered 1-19-18 and I await anxiously!
 

Clearlight

Full Member
Jul 23, 2014
730
268
63
Brisbane Australia
#79
Ordered just now , with SH handle in notes . Thanks very
much for this opportunity Kasey , no doubt the local range
flys will want one too when they see it on one of my rifles :) .

Have fun at Shot this year , hope you don’t have to kick out
too many Chinese visitors this time round !
 

bas402

Bolt Shooter
Feb 22, 2010
1,091
20
38
Northern, Colorado
#81
Dang it haven't had time to follow this but I see the rules/ info needed has changed from when posted and I ordered 1/8/18. #23649. I just hope my info is seen and mine ships. Seems like this always happens on group buys/preorders!
 

lash

Swamp Rat
Sep 28, 2012
3,239
919
113
59
Central Florida
#82
This is the Atlas bipod that got me too. I ordered one on my phone and just now realized about the email and info to ensure that I was a SH member. Fortunately, I'm not desperate for a bipod right at this time.
 

B-P-UU

Full Member
Feb 13, 2017
645
87
28
#84
perfect timing on this.. just ordered. love my PSR, but this addresses the 3 complaints I had with a wider/more stable base, locking lever, and no cant.
 

96C

Sergeant
Aug 9, 2007
773
36
28
Aust
#90
Got one on the way now for my 300WM hunting rifle, thanks guys! Looking forward to it.
 
Last edited:

lash

Swamp Rat
Sep 28, 2012
3,239
919
113
59
Central Florida
#94
Here's what Kasey said back on page 4 of this thread:

We have the last few parts here today to complete the first production run and will satisfy as many SH members CONFIRMED (see above) orders as possible less what is allocated to take to SHOT for demo
And on previous pages he expressed his intent to try and ship to SH members first until they run out of the first production run. So my take on it is that if you ordered early AND sent an email to them correctly indicating that you were a Hide member when you placed your order, per his instructions on pages 3 and 4 of this thread, you may get them earlier than everyone else. For those of us who waited a bit and then forgot until yesterday to send an email verifying SH member status, it is more likely that we will get them in March when the next production run is completed.

Hey, that's the way pre-orders work and Kasey DID say this was a pre-order.
 
Likes: M8541Reaper
Top Bottom