Decided to Rattlecan my Rifle

ken4570tc in WY

Gunny Sergeant
Belligerents
Minuteman
Aug 30, 2018
513
215
49
64
Wheatland, Wyoming
Nice work Op and others! I've got my RPR about 99% complete. I'll be adding camo to my dope card holder this weekend.

Just a few extra tips. I used the green automotive masking tape, it's stronger and seals better. I used a single hole punch to make small masking dots to keep paint out of small screw heads and mask other small things such as the parallax and magnification marks. Talk to the scope mfg technical support for advice and to make sure it won't void the warranty. They advised me to not overdue it. You don't need to make it a heavy protective coat, we're just trying to break up the pattern, any gloss and provide colors that will blend with the natural cover and shadows. You can always do touch up during down time. If it looks good at twenty yards and beyond, in the field, it's GOOD!
 
  • Like
Reactions: John Arbuckle

flynbye

Just Rich
Belligerents
Mar 14, 2013
45
7
12
OHiO
So after brewing some beer, I decided to rattle can my rifle that I just got back from Manners. . . . . MERICA! By the way, thanks again to Manners, the stock turned out fantastic. I took my time and spent probably about 2 hours taping and prepping my rifle, so I got that part right. I think the shade of green might be a little too light, but I'm hoping it'll grow on me. Theres a couple of blemishes here and there, but I'm pretty happy with how it turned out. Lemme know what you guys think, it's not exactly professional, but I made due with what I had (learned improvising early on in my military career hahaha). Also made due with my iPhone camera, hope you guys approve.
Looks good
 

perttime

Registered from Finland
Belligerents
Minuteman
Nov 28, 2018
259
106
49
Finland
^ That's good!
What do people do to get foliage shapes? Just hold it over the surface, or fix it somehow?
 

sd0311msg

Private
Minuteman
So after brewing some beer, I decided to rattle can my rifle that I just got back from Manners. . . . . MERICA! By the way, thanks again to Manners, the stock turned out fantastic. I took my time and spent probably about 2 hours taping and prepping my rifle, so I got that part right. I think the shade of green might be a little too light, but I'm hoping it'll grow on me. Theres a couple of blemishes here and there, but I'm pretty happy with how it turned out. Lemme know what you guys think, it's not exactly professional, but I made due with what I had (learned improvising early on in my military career hahaha). Also made due with my iPhone camera, hope you guys approve.
Looks great, better attention to detail than I give. I use a similar green colored Rustoelum and really enjoy how it blends year round on the prairie and in conifer forests. I gave up using browns and dark greens in my area because the dark colors are too easy to pick out compared to the light colors in my experience.
 

Attachments

sd0311msg

Private
Minuteman
Nice work! I can't bring myself to rattle can my rifles. Want to, but just can't muster up the confidence!

I thought alike when I had my fist custom rifle in my hands. I botched my first few attempts due to lack of proper prep work. Detailed de-greasing and taping is key to success. After painting dozens of my own rifles and friends, I would not consider paying someone else to camo my stick. Worst you can do is screw up and learn from it.
 
  • Like
Reactions: Earnhardt

Strykervet

Resident Phoenix Eye and Dim Mak Instructor
Belligerents
Jun 5, 2011
4,395
2,906
219
43
Pierce County, WA
Wow, that's nice and you guys really did some nice jobs! Only problem is you'll realize soon that it wears easy. Typically when we spray rifles (in the army, when I was in) it was done originally with removable bow-flage, which was discontinued but may be back on market. It's the best to use. Can change for different situations. Krylon always needed touchup, and changing to other field conditions over and over can build up paint. So thin layers are used and it wears anyway. A bit of paint remover or acetone can remove some so it doesn't build up too.

For those nice patterns you guys did above, I'd probably get a flat clear coat. If hardware store doesn't have a flat clear coat, look at a hobby shop with the paints for planes and armor. They'll have a flat clear coat.

I'd use bow-flage though if it's available. Best there is for quick and dirty camo.

An FDE Cerakote base and then using krylon or bow-flage to add color works well too. Most of the strippers, especially for bow-flage, won't harm the Cerakote. This is a great way to get quick and easy full coverage camo with little paint.

Here's a recent job I did to a tripod, mount and Surefire rail; lighting is bad but you can see how I just sprayed it solid dark OD and then sprayed other colors here and there and then used a piece of fish netting to add diamond patterns in the light and dark colors with over sprays. There is a matching UPA and 200rd. can holder for mounted use. Again, the lighting doesn't do it justice and there's actually more contrast than shown, particularly on that protruding rear leg:

IMG_1020.JPG
The M2 could have been ordered Cerakoted FDE (or other colors too I think) for $500 I think. Still kicking my ass for not having that done. If it was that price, it was a steal considering it would have been done inside and out prior to assembly. Damn. Oh well, it's still a very, very nice weapon. And a lot of fun.

In a field condition where it's actually deployed, fish netting, burlap and natural vegetation combined with a concealed dug in hasty bunker position with sandbags and camo would pretty much conceal the rest of it.

But the paint was mostly just to protect the finish of the tripod and mount, the UPA and 200rd. attachment needed refinishing. Gives it a bit of character too.
 
  • Like
Reactions: buffalowinter

stello1001

Professional Newb
Belligerents
Feb 20, 2017
1,549
682
119
Corpus Christi TX
Wow, that's nice and you guys really did some nice jobs! Only problem is you'll realize soon that it wears easy. Typically when we spray rifles (in the army, when I was in) it was done originally with removable bow-flage, which was discontinued but may be back on market. It's the best to use. Can change for different situations. Krylon always needed touchup, and changing to other field conditions over and over can build up paint. So thin layers are used and it wears anyway. A bit of paint remover or acetone can remove some so it doesn't build up too.

For those nice patterns you guys did above, I'd probably get a flat clear coat. If hardware store doesn't have a flat clear coat, look at a hobby shop with the paints for planes and armor. They'll have a flat clear coat.

I'd use bow-flage though if it's available. Best there is for quick and dirty camo.

An FDE Cerakote base and then using krylon or bow-flage to add color works well too. Most of the strippers, especially for bow-flage, won't harm the Cerakote. This is a great way to get quick and easy full coverage camo with little paint.

Here's a recent job I did to a tripod, mount and Surefire rail; lighting is bad but you can see how I just sprayed it solid dark OD and then sprayed other colors here and there and then used a piece of fish netting to add diamond patterns in the light and dark colors with over sprays. There is a matching UPA and 200rd. can holder for mounted use. Again, the lighting doesn't do it justice and there's actually more contrast than shown, particularly on that protruding rear leg:

View attachment 7008747
The M2 could have been ordered Cerakoted FDE (or other colors too I think) for $500 I think. Still kicking my ass for not having that done. If it was that price, it was a steal considering it would have been done inside and out prior to assembly. Damn. Oh well, it's still a very, very nice weapon. And a lot of fun.

In a field condition where it's actually deployed, fish netting, burlap and natural vegetation combined with a concealed dug in hasty bunker position with sandbags and camo would pretty much conceal the rest of it.

But the paint was mostly just to protect the finish of the tripod and mount, the UPA and 200rd. attachment needed refinishing. Gives it a bit of character too.
I've used krylon and rustoleum and it really doesn't come off easy as you say. The army and my hunting situations are totally different though. I've hunted real hard this season though. I only see a tad bit of paint that scraped off on the front of the magwell which I use as a barricade stop, and a few other areas but nothing major. It also didn't scrape all the way off, I can see the primer I used on those scrapes but not the original finish. I just think it all comes down to how you prepare. I like to clean and degrease it all with alcohol. Then I like to prime, I see many people don't prime and just paint over the original finish. That's cool and all but not me. Then of course, I spray clear over my finished pattern. I've also had a rather hard time removing older paint jobs with acetone so to me it seems the paint sticks relatively well considering it's no more than a 30 dollar paint job. Preparation is key IMO.
 

Mooseknuckles

Private
Belligerents
Jan 11, 2014
506
1,538
99
Just did my Howa 308 stock here the other day. Came out pretty good. Need to put the gun back together and see what it looks like. Pretty easy process, just need to prep the stocks correctly for a good finish.59557C85-DA6E-4562-946C-F497CC74C423.jpeg
 

AIAW

★★★★★
Belligerents
Aug 16, 2001
5,584
4,352
219
Central Texas
Nice work everyone!

I've done a few rattle-can jobs in the past, but found myself switching to Cerakoat or Duracoat. Cerakoat mainly for things that I can bake and Duracoat air-cure for things that I can't.

Still can't bring myself to do an optic. Getting around all of the knobs and other controls - just impossible without disassembly (which is virtually impossible outside of the factory). Typically end up just using McNett wrap.

I can do strictly concealment painting - wouldn't win any awards though. Done it before on mediocre optics - nothing high-end.
 

stello1001

Professional Newb
Belligerents
Feb 20, 2017
1,549
682
119
Corpus Christi TX
Nice work everyone!

I've done a few rattle-can jobs in the past, but found myself switching to Cerakoat or Duracoat. Cerakoat mainly for things that I can bake and Duracoat air-cure for things that I can't.

Still can't bring myself to do an optic. Getting around all of the knobs and other controls - just impossible without disassembly (which is virtually impossible outside of the factory). Typically end up just using McNett wrap.

I can do strictly concealment painting - wouldn't win any awards though. Done it before on mediocre optics - nothing high-end.
No need to disassemble a scope, just be really extra good at masking...

20181102_170848.jpg
 

Jsmith410

Private
Belligerents
Minuteman
Dec 10, 2017
220
77
34
KY
Nice work everyone!

I've done a few rattle-can jobs in the past, but found myself switching to Cerakoat or Duracoat. Cerakoat mainly for things that I can bake and Duracoat air-cure for things that I can't.

Still can't bring myself to do an optic. Getting around all of the knobs and other controls - just impossible without disassembly (which is virtually impossible outside of the factory). Typically end up just using McNett wrap.

I can do strictly concealment painting - wouldn't win any awards though. Done it before on mediocre optics - nothing high-end.
I’m the same. I can’t bring myself to do a scope. I’m working on building a cerakote oven out of a old locker and a smoker heating element.
 
  • Like
Reactions: TACC

buffalowinter

Rick Jones MAJ, SF (Ret)
Belligerents
Mar 17, 2014
1,200
2,526
219
101
Llano, TX
I really like Cerakote, but recently I have been building a bunch of rifle clones as used by USSOCOM. Researching these guns, almost all had a spray paint finish and all had battle wear. I really like the look of a rifle that has been used hard and has a story to tell. Consequently, I've been giving a lot of my USSOCOM clones a battle worn spray can finish. Here is a very accurate Mk12 Mod 1 Special Purpose Rifle clone. I'm still waiting on my Allen Engineering suppressor.

Colt m16a1 lower
Colt upper
Brownell's Mk12 SPR 5r rifled barrelDSCN2027.JPGDSCN2028.JPG
Allen Engineering brake and collar for Allen Engineering suppressor
Gas Buster charging handle
M16a1 original surplus stock
Precision Reflex carbon fiber handguard
Precision Reflex gas block w/ front sight
Swans #40 buis (not shown)
Colt bolt
Harris Bipod
m16a1 grip
Nightforce 2.5-10x scope w/ swans rings
Vortex red dot
 
Last edited:

Eustice

Private
Belligerents
Aug 14, 2014
293
144
49
Chapin, South Carolina
I’ve got a bit of hesitation to use something when it’s new and perfect. I want to keep it looking new and perfect for as long as possible. I found that putting paint on them let’s me not care. I don’t abuse my rifles because of it, but I don’t try to keep it perfect by not using it. So when it gets banged off a barricade or it starts raining and is muddy I don’t have that hesitation to not use what I have. If you’ve used quality stuff in your build, using it won’t hurt it. The paint allows me to get past the asthetic issue I’d normally have where I don’t want to get marks on my pretty new rifle.
 

DaleGribble82

.308 is not dead.
Belligerents
Oct 2, 2018
1,006
741
119
28
North Carolina
I really like Cerakote, but recently I have been building a bunch of rifle clones as used by USSOCOM. Researching these guns, almost all had a spray paint finish and all had battle wear. I really like the look of a rifle that has been used hard and has a story to tell. Consequently, I've been giving a lot of my USSOCOM clones a battle worn spray can finish. Here is a very accurate Mk12 Mod 1 Special Purpose Rifle clone. I'm still waiting on my Allen Engineering suppressor.

Colt m16a1 lower
Colt upper
Brownell's Mk12 SPR 5r rifled barrelView attachment 7021577View attachment 7021578
Allen Engineering brake and collar for Allen Engineering suppressor
Gas Buster charging handle
M16a1 original surplus stock
Precision Reflex carbon fiber handguard
Precision Reflex gas block w/ front sight
Swans #40 buis (not shown)
Colt bolt
Harris Bipod
m16a1 grip
Nightforce 2.5-10x scope w/ swans rings
Vortex red dot
Why are you yelling?? Sweet MK12 though!!
 
  • Like
Reactions: TACC

buffalowinter

Rick Jones MAJ, SF (Ret)
Belligerents
Mar 17, 2014
1,200
2,526
219
101
Llano, TX
That's not yelling...THIS IS YELLING!

And to answer your question, I type in a larger font so that I can proof read what I wote so that I appear more educated than my 8th grade education.
 
  • Like
Reactions: TACC

308ftWIN

Sergeant of the Hide
Hessian
Belligerents
Minuteman
Apr 9, 2018
189
58
34
I'd rather yank up this old thread than start a new one.

I have a Savage Bolt Action Rimfire that I'm going to paint the barrel/action. Not the stock. Tips/tricks for taping off the ejection port and where the bolt enters the receiver/notch where the bolt handle locks down?
 

Eustice

Private
Belligerents
Aug 14, 2014
293
144
49
Chapin, South Carolina
I'd rather yank up this old thread than start a new one.

I have a Savage Bolt Action Rimfire that I'm going to paint the barrel/action. Not the stock. Tips/tricks for taping off the ejection port and where the bolt enters the receiver/notch where the bolt handle locks down?
Quick method is to roll up some card stock into a tube. Slide it in and let it unroll. Stuff it full of paper towel to make it seal pretty well then use a razor to cut off excess of the roll sticking out the back.
 
  • Like
Reactions: TACC and 308ftWIN

Eggman

Private
Belligerents
Nov 7, 2007
12
2
6
wyoming
I really like Cerakote, but recently I have been building a bunch of rifle clones as used by USSOCOM. Researching these guns, almost all had a spray paint finish and all had battle wear. I really like the look of a rifle that has been used hard and has a story to tell. Consequently, I've been giving a lot of my USSOCOM clones a battle worn spray can finish. Here is a very accurate Mk12 Mod 1 Special Purpose Rifle clone. I'm still waiting on my Allen Engineering suppressor.

Colt m16a1 lower
Colt upper
Brownell's Mk12 SPR 5r rifled barrelView attachment 7021577View attachment 7021578
Allen Engineering brake and collar for Allen Engineering suppressor
Gas Buster charging handle
M16a1 original surplus stock
Precision Reflex carbon fiber handguard
Precision Reflex gas block w/ front sight
Swans #40 buis (not shown)
Colt bolt
Harris Bipod
m16a1 grip
Nightforce 2.5-10x scope w/ swans rings
Vortex red dot
tenor.gif


you mean MK12 Mod 0

very nice rifle, just not a Mod 1
 
Last edited:
  • Like
Reactions: TACC

TACC

Sergeant of the Hide
Belligerents
Minuteman
Jan 10, 2019
445
310
69
I’ve got a bit of hesitation to use something when it’s new and perfect. I want to keep it looking new and perfect for as long as possible. I found that putting paint on them let’s me not care. I don’t abuse my rifles because of it, but I don’t try to keep it perfect by not using it. So when it gets banged off a barricade or it starts raining and is muddy I don’t have that hesitation to not use what I have. If you’ve used quality stuff in your build, using it won’t hurt it. The paint allows me to get past the asthetic issue I’d normally have where I don’t want to get marks on my pretty new rifle.

My reasoning as well, I know what I want it to end up.looking like, but doubt the end result will be accomplished
 

HeavyAssault

Private
Belligerents
Minuteman
Feb 14, 2011
245
83
34
Alabama/Georgia/Virginia
I bought into the Brownell's Aluma-Hyde II. When the surface is prepped right this stuff is a brute. Yes, it does seems to gum up a nozzle pretty quick so order the extra nozzles. I have found when sprayed it will "splatter" as well so it goes on pretty thick sometimes. In the end most everything I've done with Aluma-Hyde is doing well for wear not to mention it looks great.

For painting optics there's a few things that work great. Tape, cotton balls, and Vaseline. Tape makes nice clean lines for covering a larger area IE the turret markings. Wide or multiple strips of tape can cover the objective end pretty easily. Cotton/cotton balls can fill in areas that are difficult to tape up. Vaseline dabbed on with something like a Q-tip allows you to cover smaller spots (say turret index lines) with an element that the paint cannot adhere to thus you wipe it clean and no paint.

Patterns: Nothing isn't useful. Take a stalk of pine needles, spread them a tad. Plant leaves with distinct edges. Even the mesh bags in the supermarket that hold onions and potatoes are awesome. Grab up some cheap laundry bags, nice mesh pattern. Not to mention stickers in whatever shape you like to use.

Took to practicing skills on a cheap stainless tumbler.

IMG_20190929_171454226.jpg
 

roostercogburn98

Private
Belligerents
Nov 3, 2010
263
472
69
Well mine is not nearly as nice as the rest of these here but here is a rattle can job I did once. Some nice looking rifles here, guess I’ll go to lowes and stock up on paint for practice!76646C04-6494-4B60-A5E5-2FA2A0EED955.jpegC70A32E5-580E-441B-8A14-694C70E765D8.jpeg
 
  • Like
Reactions: TACC