Clearance sale on Remington 700 barreled actions Bartlein,Proof research

onpoint

Private
Belligerents
Mar 28, 2009
247
9
22
58
Howell, Michigan
I bought one of these the other day off your website. If you can PM me any info about your results with factory ammo, load development info and such I would appreciate it.
 

PTON

Private
Minuteman
Aug 14, 2019
11
1
6
I’m going to run some 6 dasher,6br,and 6CM barreled actions on defiance tenacity’s to put on the website next week. Then I will do some on impact actions. Thanks
Oooooh what's pricing in those actions with said contour bartlein barrel?
 

KineticU

Private
Minuteman
Aug 11, 2019
11
1
6
Hi dstactical,
Novice rifleman here, trying to figure out to go factory or build.
1. The 224 barreled action is a remington 700 blueprint and will bed into any 700 SA chassis? Like KRG bravo, Greyboe, MDT, Mcree?
Then just have to figure out the DBM, mag and trigger, and then the rest of it.

2. Or I can go 6.5 CM.

I do have an excellent gun smith who can help me. He can custom build as well, but price is too high for the cutom route.
Thanks
 

Lunchbox27

Professional whisky drinker
Belligerents
Mar 23, 2017
653
428
69
MD
Hi dstactical,
Novice rifleman here, trying to figure out to go factory or build.
1. The 224 barreled action is a remington 700 blueprint and will bed into any 700 SA chassis? Like KRG bravo, Greyboe, MDT, Mcree?
Then just have to figure out the DBM, mag and trigger, and then the rest of it.

2. Or I can go 6.5 CM.

I do have an excellent gun smith who can help me. He can custom build as well, but price is too high for the cutom route.
Thanks
If you get the Bravo, MDT or McREE you won’t need to bed. That is the route I would go, if in your shoes. You also won’t need to look for the bottom metal as it is already part of the chassis.

Pick a barreled action from DSTactical you want, drop it in a KRG Bravo with a Trigger Tech Special and you are on your way.

Most spend $800-1000 on their first rifle and end up swapping triggers, rails, and the stock. At this price point you are already ahead, having a trued receiver and a custom barrel.
 
Last edited:

KineticU

Private
Minuteman
Aug 11, 2019
11
1
6
If you get the Bravo, MDT or McREE you won’t need to bed. That is the route I would go, if in your shoes. You also won’t need to look for the bottom metal as it is already part of the chassis.

Pick a barreled action from DSTactical you want, drop it in a KRG Bravo with a Trigger Tech Special and you are on your way.
Lunchbox27
Appreciate your quick response. Sounds like that will work out for me.
 
  • Like
Reactions: Lunchbox27

eyekahn

Private
Belligerents
Oct 2, 2012
231
49
34
32
Wanting to buy the 10-8 heavy Palma 24” 6.5. I see it doesn’t list the oversized recoil lug or the oversized bolt knob. Does it come with both? Any photos of this particular BA? Also, what twist?
 

Idsharp

Private
Minuteman
Feb 17, 2018
5
5
6
I bought one of the barreled actions from them chambered in 224 Valkyrie in a Proof Research barrel. I then purchased a Greyboe renegade stock with bottom metal and two 5 round AI mags that they modified for the 224 Valkyrie rounds. I recently received it from my ffl. The fit and finish is great and the machining is excellent.
I switched out the X Mark Pro trigger to a great old 40X trigger I had and mounted a Vortex pst gen2 2-10 power scope on it. I’ve been anxiously waiting for a chance to shoot it. I bought a couple of boxes of both Hornady 88 gr. and Federal 90 gr.
I finally had a chance today for only a few minutes to hurry and bore sight it then shoot 4 rounds at 100 yards with the Hornady ammo. The first shot was to see where it was shooting, make the necessary adjustments to sight it in, and then three shots for a group. I wish I could post a picture. It was less than a 1/2” three shot group!
I’m very excited for more thorough testing of the rifle and ammunition. I’m very pleased and thankful for my experience with Deep South Tactical in discussing this build with me and putting it all together.
 

dstactical

Full Member
Commercial Supporter
Belligerents
Feb 21, 2010
368
23
22
43
Mississippi
www.deepsouthtactical.com
I bought one of the barreled actions from them chambered in 224 Valkyrie in a Proof Research barrel. I then purchased a Greyboe renegade stock with bottom metal and two 5 round AI mags that they modified for the 224 Valkyrie rounds. I recently received it from my ffl. The fit and finish is great and the machining is excellent.
I switched out the X Mark Pro trigger to a great old 40X trigger I had and mounted a Vortex pst gen2 2-10 power scope on it. I’ve been anxiously waiting for a chance to shoot it. I bought a couple of boxes of both Hornady 88 gr. and Federal 90 gr.
I finally had a chance today for only a few minutes to hurry and bore sight it then shoot 4 rounds at 100 yards with the Hornady ammo. The first shot was to see where it was shooting, make the necessary adjustments to sight it in, and then three shots for a group. I wish I could post a picture. It was less than a 1/2” three shot group!
I’m very excited for more thorough testing of the rifle and ammunition. I’m very pleased and thankful for my experience with Deep South Tactical in discussing this build with me and putting it all together.
Thank you for the kind words! Glad to see your getting good groups with factory ammo. We noticed with some of the factory ammo early on it was all over the board on speeds. Same box some were over 100fps different. Hand loads it should shoot a tiny hole. Here are Some groups we shot and some customers sent. 6mm -30cal. Thanks David.
 

Attachments

Last edited:
  • Like
Reactions: Lunchbox27

KineticU

Private
Minuteman
Aug 11, 2019
11
1
6
I bought one of the barreled actions from them chambered in 224 Valkyrie in a Proof Research barrel. I then purchased a Greyboe renegade stock with bottom metal and two 5 round AI mags that they modified for the 224 Valkyrie rounds. I recently received it from my ffl. The fit and finish is great and the machining is excellent.
I switched out the X Mark Pro trigger to a great old 40X trigger I had and mounted a Vortex pst gen2 2-10 power scope on it. I’ve been anxiously waiting for a chance to shoot it. I bought a couple of boxes of both Hornady 88 gr. and Federal 90 gr.
I finally had a chance today for only a few minutes to hurry and bore sight it then shoot 4 rounds at 100 yards with the Hornady ammo. The first shot was to see where it was shooting, make the necessary adjustments to sight it in, and then three shots for a group. I wish I could post a picture. It was less than a 1/2” three shot group!
I’m very excited for more thorough testing of the rifle and ammunition. I’m very pleased and thankful for my experience with Deep South Tactical in discussing this build with me and putting it all together.
Are the AI mags 308 or 223 modified? Double or single stack?
 

car16smg

Lead slingin
Belligerents
Mar 8, 2014
117
34
34
Tennessee
Had the opportunity to spend some time in the shop with David, Ryan, and Nick yesterday. These guys are top notch; very professional, knowledgeable, and personable. Storefront is awesomely appointed with quality gear. I was even able to pick up a DST Reaper 20” barreled action in 6mm Creedmoor! This is a $1600 package they’re selling for $999. Fit and finish is remarkable. They already had a Calvin Elite installed which was spectacular! Gonna drop it in a spare McRee chassis, and I’ll post more pics of it and groups after that. Big thanks to Deep South Tactical, and I can’t wait to use their 1 mile range once it’s finished!C9201A0A-9131-4393-8E82-E726B95D6922.jpegE19E1E25-08F1-4909-B1AA-D8F0030599E7.jpeg1F235E26-2604-485E-A036-B0BDBFBF6377.jpeg74681D6F-FFA2-46C2-8468-5C8DA6FBDFD7.jpeg69DFEB5D-B05E-46C2-A009-70C52B8563A5.jpeg
 
  • Like
Reactions: dstactical

dstactical

Full Member
Commercial Supporter
Belligerents
Feb 21, 2010
368
23
22
43
Mississippi
www.deepsouthtactical.com
Had the opportunity to spend some time in the shop with David, Ryan, and Nick yesterday. These guys are top notch; very professional, knowledgeable, and personable. Storefront is awesomely appointed with quality gear. I was even able to pick up a DST Reaper 20” barreled action in 6mm Creedmoor! This is a $1600 package they’re selling for $999. Fit and finish is remarkable. They already had a Calvin Elite installed which was spectacular! Gonna drop it in a spare McRee chassis, and I’ll post more pics of it and groups after that. Big thanks to Deep South Tactical, and I can’t wait to use their 1 mile range once it’s finished!View attachment 7143551View attachment 7143552View attachment 7143553View attachment 7143554View attachment 7143555
Thanks man! Glad to have you there.
 
  • Like
Reactions: Lasley0104

bgavin

Sergeant of the Hide
Belligerents
Minuteman
Mar 19, 2018
305
95
34
AL
Had the opportunity to spend some time in the shop with David, Ryan, and Nick yesterday. These guys are top notch; very professional, knowledgeable, and personable. Storefront is awesomely appointed with quality gear. I was even able to pick up a DST Reaper 20” barreled action in 6mm Creedmoor! This is a $1600 package they’re selling for $999. Fit and finish is remarkable. They already had a Calvin Elite installed which was spectacular! Gonna drop it in a spare McRee chassis, and I’ll post more pics of it and groups after that. Big thanks to Deep South Tactical, and I can’t wait to use their 1 mile range once it’s finished!View attachment 7143551View attachment 7143552View attachment 7143553View attachment 7143554View attachment 7143555
Nice!

Hoping to get over there one weekend when I’m free. I’m in Alabama and no shops have high end gear near me. It would be nice to see things before I buy.