CarbonSix barrels

jzwolen

Sergeant
Apr 10, 2017
260
9
18
#4
If the price was significantly less than a Proof CF, I would try one...but its too close not to spend the extra few dollars on a known commodity. My Proof is a hammer.
 

spelunk

Gun Loving Redneck
Feb 19, 2010
501
12
18
Prosser, WA
#5
I've been eyeballing one for a while now. The reason I am considering one of these over Proof, Carbonsix offers prefit barrels in 6.5 PRC. And they actually offer muzzle threads on their prefits, something Proof needs to pull their head out of their asses and do. Sorry I can't contribute to the thread, but I am interested in what other people have to say. If nobody gives me a good reason not to, I will probably have a Carbonsix 6.5 PRC later this summer.
 
Likes: Robby0931

m6z

Private
Mar 2, 2013
234
37
28
#7
I've been eyeballing one for a while now. The reason I am considering one of these over Proof, Carbonsix offers prefit barrels in 6.5 PRC. And they actually offer muzzle threads on their prefits, something Proof needs to pull their head out of their asses and do. Sorry I can't contribute to the thread, but I am interested in what other people have to say. If nobody gives me a good reason not to, I will probably have a Carbonsix 6.5 PRC later this summer.
I don't follow. All the Proof Savage Pre-Fit barrels have muzzle threads.

https://www.proofresearch.com/the-products/barrels/savage-pre-fit-barrel/
 
Likes: spelunk

spelunk

Gun Loving Redneck
Feb 19, 2010
501
12
18
Prosser, WA
#8
I don't follow. All the Proof Savage Pre-Fit barrels have muzzle threads.

https://www.proofresearch.com/the-products/barrels/savage-pre-fit-barrel/
I stand corrected. The last time I looked they did not. Between me and a buddy, we contacted them 3 times over the last few years and they weren't offering muzzle threads at the time of order. They did offer to thread it if I shipped it back to them, but that $ adds up quick. I am happy to see they are now offering threads.
 
Mar 3, 2017
172
8
18
Birmingham, Michigan
#10
I just finished a build using one of their barrels and I am very disappointed with their work. Long story short, they blueprinted my Rem 700, installed the barrel and muzzle brake. They instructed me to send them my Recoil Lug because I wanted to use a particular one which they kept and then simply installed a cheap one hoping I won't notice. Also, the muzzle brake is not correctly timed. Here is a link to my build:

https://forum.snipershide.com/threads/260-remington-build-completed.6843700/#post-6869991
 

Tree

F.O.C.U.S
Jan 28, 2018
122
34
28
Elk River, MN (Frozen tundra)
#11
I just finished a build using one of their barrels and I am very disappointed with their work. Long story short, they blueprinted my Rem 700, installed the barrel and muzzle brake. They instructed me to send them my Recoil Lug because I wanted to use a particular one which they kept and then simply installed a cheap one hoping I won't notice. Also, the muzzle brake is not correctly timed. Here is a link to my build:

https://forum.snipershide.com/threads/260-remington-build-completed.6843700/#post-6869991
Damn that sucks.... have you not had a chance to shoot it? I am not having them do work and just ordered the barrel. I am surprised with the lack of response as I get prompt helpful replies from them.
 
Mar 3, 2017
172
8
18
Birmingham, Michigan
#12
Damn that sucks.... have you not had a chance to shoot it? I am not having them do work and just ordered the barrel. I am surprised with the lack of response as I get prompt helpful replies from them.
No I cannot shoot it because I had to send the barreled action to Kampfeld Customs to have the muzzle brake properly timed/fixed, a thread protector fabricated and a side bolt stop/release added (CarbonSix does not do side bolt stop/release). In addition, here in Michigan it is too cold to shoot and the outdoor ranges are closed till spring.
 
Top Bottom