Ammunition from McCourt Munitions, LLC

FCS

Gunny Sergeant
Commercial Supporter
Belligerents
Jun 3, 2005
1,595
88
154
ABQ, NM
www.mccourtmunitionsllc.com
223 bolt gun shooters, running DBM or a hinged floor plate?
Normally I run a longer OAL, maximize performance / accuracy, puts cannelure away from case mouth.
I do have a nice 73 Berger Match BT load for 9 twist Rem 700 (developed in 5R, 20”), also shoots well in 70 HBV w/9 twist bbl.
What brand, configuration bolt guns are most common?
 

wjm308

Send it!
Belligerents
Nov 30, 2012
2,612
1,432
219
Black Forest, CO
View attachment 7109089

McCourt’s 6.5CM 140gr VLD’s. 100degF traveling at 2895fps. Height 1.8”, Width 1.45”
Dang! I have McCourt loading up some 7mm SAUM for me, already have a TS set ready to go for this weekend, just Load Dev at 300 yards, if these shoot even 3x worse than yours blb I'll be thrilled! Nice shooting and clearly nice ammo, I have a boatload of 6.5CM brass I've been contemplating sending to Andrew, you maybe just sealed the deal...
 
  • Like
Reactions: blbennett1288

blbennett1288

de·plor·a·ble
Belligerents
Apr 24, 2017
1,363
699
119
Hoover, Alabama
Dang! I have McCourt loading up some 7mm SAUM for me, already have a TS set ready to go for this weekend, just Load Dev at 300 yards, if these shoot even 3x worse than yours blb I'll be thrilled! Nice shooting and clearly nice ammo, I have a boatload of 6.5CM brass I've been contemplating sending to Andrew, you maybe just sealed the deal...
I have been really impressed with the consistency. I only chrono’ed 5 today but SD 4fps and ES 10fps. That is directly in line with the other rounds I have chrono’ed from McCourt, I’d say probably 20-30 at this point in time.
 
  • Like
Reactions: wjm308

FCS

Gunny Sergeant
Commercial Supporter
Belligerents
Jun 3, 2005
1,595
88
154
ABQ, NM
www.mccourtmunitionsllc.com
223 Bolt gun shooters with a factory 9 twist barrel, 73 Berger Match BT from 20" Rem 700 5R at 2825 fps is available for purchase.
20 rd cardboard box or 50 rd plastic box
$1.27 / rd plus actual shipping

Send your fired brass back to be remanufactured for use in same chamber, $1.06 / rd plus actual shipping.

Working on a load for factory 7 twist barreled 223, will post that information as soon as I can finish up the development.
 
  • Like
Reactions: gebhardt02

Dougie308

Sergeant
Belligerents
Jul 28, 2011
909
791
99
St. Louis, MO
Best of luck to you sir. I hope your profits and happiness both reach beyond your hopes and expectations.


McCourt Munitions, LLC is a manufacturer of high precision, match ammunition.

While the FFL to load commercially is new, I have been building high quality ammunition for my own use for many years. I have been competing in shooting sports since 1991. Everything from IPSC & IDPA, to 3 gun, to precision/tactical, and F-class. 2006 I finished 9th F-open at US F-class National Championships, 2007 I finished 4th F-open. Due to a job change I have been unable to compete at USFCNC from 2008 through 2011. I expect to be back at USFCNC in 2012 and to make several precision/tactical matches during 2012. In short, McCourt Munitions specializes in your specialty so you don’t have to worry about your ammunition performing as needed.

308 Match ammunition is available for factory barreled, longer lead chambers and for custom barreled, shorter lead chambers. Factory barreled rifles such as FN SPR, AI AE/AW, Rem 700 PSS/5R, or Win 70 HBV/Stealth benefit from our load optimized for longer lead chambers.
Running a GAP, Spartan, KMW, Score High, or other custom built 308? McCourt Munitions offers loaded ammunition that is optimized around the shorter lead found in these custom built rifles.

McCourt Munitions 260 Remington ammunition is offered in several configurations, depending on reamer used to chamber barrel. E-mail or PM me so we can get you ammunition that has been optimized for the chamber in your rifle.
KMW 260, we have a load for that.
260 Tac Match, we have a load for that.
260 Rem SAAMI min spec, we have a load for that.
Powder charge and OAL have been developed specifically around dimensions of each chamber mentioned above.

McCourt Munitions also offers custom loads, tailored exactly to your rifle. Contact me for details on this service.

Are you looking for a way to keep your rifle ammunition costs down? McCourt Munitions will reload your fired brass. Some restrictions apply, contact me for details.

Introduction pricing, good from 19 Oct to 15 Nov. 2011, is as follows:
308 Win Match in Winchester brass with 168 A-max $1/rd
308 Win Match in Winchester brass with 178 A-max $1/rd
308 Win Match in Winchester brass with 175 SMK $1.05/rd
260 Rem Competition Match in RP brass with 139 Scenar $1.35/rd
260 Rem Competition Match in RP brass with 142 SMK $1.30/rd
243 Win Premium Match in Lapua brass with BN 115 DTAC $1.70/rd
Shipping charges will be actual shipping cost. McCourt Munitions does not make money on getting the ammunition to you.

Website is being built as quickly as possible.
Short term, please send me a PM or an e-mail with any questions you may have.

Andrew McCourt
McCourt Munitions, LLC
sales@mccourtmunitionsllc.com
505-859-0316