AIAX Max Barrel Contour. MTU, Straight taper?

Mr. F

Sergeant of the Hide
Belligerents
Dec 10, 2011
477
84
34
So im thinking about having a 6.5 barrel spun for PRS style matches but im not sure how large of a shank will the AXSA i have will take. Just want to confirm its good for 1.250" under the rail.
 

SHGronk

Private
Minuteman
Jul 28, 2019
17
14
6
The standard barrel is 29.4mm at the action (well my Lothar Walther is), so I imagine you will be fine.
 

ShtrRdy

Gunny Sergeant
Belligerents
Sep 17, 2011
2,256
428
189
65
High Plains
I've had a couple barrels spun up for my AT rifle. I went with a 1.200" shank to better match the original barrel on the rifle. Like the M24 contour.
 

Huskydriver

You gotta want it....
Belligerents
Minuteman
Apr 17, 2018
2,343
2,965
119
SLC, Utah
I think you would be fine but what muzzle attachment/supressor do you rock and what length you thinking?
 

Mr. F

Sergeant of the Hide
Belligerents
Dec 10, 2011
477
84
34
On this im thinking 26" I have a few short sticks already and im going for speed on this one.
 

NoLegs24

Wheels
Belligerents
Aug 15, 2013
1,004
1,000
219
San Diego, CA
For an AX/ AT/ AW/ AWM = 1.250"

For an AXMC/ PSR/ ASR/ AXSR = 1.350"

Yes, I run 1.250" straight on my AX and AW.

And 1.350" straight for the big bro's
 
Last edited:
  • Like
Reactions: Huskydriver

Huskydriver

You gotta want it....
Belligerents
Minuteman
Apr 17, 2018
2,343
2,965
119
SLC, Utah
I think you would be good to go then. Only concerns I would have had was diameter of the muzzle attachment fitting to the barrel and having enough clearance to account for barrel whip not touching the end of the hadguard
 

Mr. F

Sergeant of the Hide
Belligerents
Dec 10, 2011
477
84
34
I think you would be good to go then. Only concerns I would have had was diameter of the muzzle attachment fitting to the barrel and having enough clearance to account for barrel whip not touching the end of the hadguard

Finishing a MTU/Heavy Var at 26" too thick for 5/8-24 threads on the 419 breck you think?