6 dasher body die for 6x47L


Nov 8, 2013
Hey guys, just about to start necking down some 6.5L to 6. This is for a no turn neck chamber so I am trying to avoid turning down anything, mostly due to my lack of motivation and neck turner here at the hacienda.

Anywho I have a 6 dasher body die, well a fl bushing die but I removed the stem assembly and use it more as a body die. Was thinking about running the 6.5 brass thru the dasher die first (adjusted up to just hit the neck) to initially size down the neck gradually then move to the Forster fl 6x47L die.

I dont think there should be an issue and may help me ease the brass into the FL die, but I just wanted to see if anyone has done this or some of the sort and has experienced some sort of negative as a result.

Let me know if there is anything I should be looking for and thanks in advance ya'll.