308 AR10 Build Info/Picture Thread

G

Guest

Guest
#1
green338XFirst Sergeant
Rating: 3.1/5 this site
1034 posts this site
308 AR/AR10 Build Info/Picture Thread
10/13/2014 Last edited 10/13/2014 by green338
(2 votes)
[HR][/HR]
Let's see your gassers!



Here's one of my ex's


Mega Maten Monolithic receiver sets

GA Precision GAP-10 barrel 20" w/ BO Brake

Magpul PRS stock w/ JP SCS

Geissele SDE Trigger

Spuhr Mount

Schmidt & Bender 5-25 MRAD DT CCW XR



[IMG2=JSON]{"alt":" photo DSC03524_zps477a6cdd.jpg","data-align":"none","data-size":"full","src":"http:\/\/i892.photobucket.com\/albums\/ac129\/green122\/DSC03524_zps477a6cdd.jpg"}[/IMG2]

Rate now:
wareagle700

XFirst Sergeant
Rating: 3.7/5 this site
1317 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
10/14/2014 Last edited 10/29/2014 by wareagle700
(2 votes)
[HR][/HR]
Very nice sir.

My .308:

MEGA MA-10 Receivers
JP 15" Handguard
Badger Brake
Syrac Adjustable Gas Block
Lilja barrel cut to 17.5" from 20" (rifle length gas)
JP LMOS bolt carrier group
JP SCS recoil system
Geissele SSA-E Trigger
Magpul ACS stock
Nightforce 3.5-15x50 in a Nightforce Unimount

This is the smoothest shooting .308 I have ever shot. Accuracy is as good as I can ask for.
 
G

Guest

Guest
#2
JerkeeJoeXSergeant
Rating: 0.0/5 this site
276 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
11/11/2016
[HR][/HR]
My first large frame AR build. 6.5cm built on a Maten set. Should get it out tomorrow morning to give it a test drive.





Rate now:
BLUERUBIXPrivate
Rating: 0.0/5 this site
8 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
11/17/2016
[HR][/HR]




Just posted this in the new members section, but figured it made sense to add to the thread. Haven't tried it yet, but I have high hopes!



- Aero precision enhanced upper and grip

- Technical machining lower

- JP supermatch heavy contour 20" barrel with matched bolt

- Aero precision nickel boron BCG

- VG6 Gamma muzzle break

- Geissele DMR trigger

- Magpul PRS stock

- Atlas PSR bipod

- JP adjustable gas block

- JP silent capture heavy buffer

- Leupold Mark 4 rings

- Vortex Viper PST FFP



Rate now:
HemiPowrdXPrivate
Rating: 3.0/5 this site
6 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
12/25/2016
(1 vote)
[HR][/HR]
A very merry Christmas in 6.5 Creedmore





Rate now:
MRADSHOOTERX30 MONTHS
Premium Member
Private
Rating: 0.0/5 this site
3 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
12/29/2016
[HR][/HR]
5RWill wrote:
Blackfoot, great pics and an awesome rifle. Looks great, be sure to post some groups.



Don't have everything together yet but here is my build list. Just ordered a Geissele SD-E for 25%..couldn't resist.



Aero Precision Upper - owned

Aero Precision Lower - owned

Aero Precision LPK

Aero Precision rifle length buffer tube - owned

Fortis 14" Switch rail

Aero Precision Mid Length gas tube

JP 16" Supermatch 308 barrel

JP HP bolt

JP buffered carrier

SLR industries Sentry 7 Adj gas block

Geissele SD-E - owned

Magpul MIAD

Magpul PRS Gen 3

ARC QD-L 34mm mount - owned

Bushnell ERS - owned​
Love the color man. I too have an LMT-MWS but it came in factory burned bronze which I'm reluctant to blast off. What was your hardener mix on it? Looks satin finish which I like. If I may ask, is that the 18SS barrel which you cut down or is it a 16? Did Marvin Pitts do the work on that barrel? Mine came with the 16CL barrel and I have a 18SS which I might send for work.

Great looking beastie.

Rate now:
KimberGuyXSergeant
Rating: 3.1/5 this site
250 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
01/04/2017
[HR][/HR]


Rate now:
Otero51XSergeant
Rating: 3.1/5 this site
171 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
01/16/2017 Last edited 01/16/2017 by Otero51
[HR][/HR]
Here's my budget build. First time building anything AR related.


Nothing fancy:
-PSA blem lower/upper (upper bedded with some jbweld to take out the slack).
-Ballistic advantage ss 22" 6.5cm
-JL Billet 308/AR10 15" Angle Cut M-Lok Handguard Low Profile
-aero precision black nitrided bcg
-schuller brake
-superlative arms adj clamp on GB
-armalite ar10 buffer
-rifle length buffer tube and spring
-magpul moe fixed rifle stock
-PSA EP trigger
-Ergo tactical deluxe grip
-Strike industries UDC
-American Defense AD-RECON-S 20 MOA 34 STD scope base
-Burris xtr-II 5-25×50

Showing some promise with Hornady eld-x 140gn factory ammo (5 shots at 106 yds while prone on top of 16"of snow and this monkey behind it)

 
G

Guest

Guest
#3
BravoSector1XFirst Sergeant
Rating: 3.0/5 this site
1308 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
01/18/2017
[HR][/HR]
Meat Hammer



Rate now:
tbugher62XSergeant
Rating: 3.1/5 this site
364 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
Wednesday at 10:41 AM
[HR][/HR]
BravoSector1 wrote:
Meat Hammer

Now that is nice!!!!!

Rate now:
Tahoe333XSergeant
Rating: 3.0/5 this site
364 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
10:58 AM Last edited 11:17 AM by Tahoe333
[HR][/HR]




Just finished this California Compliant build.

I put 100 rounds through it yesterday and it ran great after I got the gas block dialed in. The SLR gas block is set to the 7th click open. The groups were @ .6 mils at 100yds, (2-ish inch)

All day long it would put 2 rounds on top of each other and then throw a flier. I hope that once I get a good copper base inside the barrel the groups will tighten up.





Aero M5 lower/upper.

Lantac BCG.

Proof carbon 18" 308 10-twist.

APA Lil bastard brake.

SLR adj gas block.

Gieselle SSAE FCG.

API carbon 12" rail. I had to go 85lbs on the barrel nut to get it lined up for the gas tube. It was either 85lbs or 35lbs, I went with 85lbs.

Vintage A1 stock.

Bullshit CA compliant kydex wrapped pistol grip.

Rifle buffer spring with Standard buffer.

KAC Micro BUIS.

Armalite dust cover rod (longer). The DPMS rod was too short.

Pivot pin was very tight. I had to do a bit of sanding on the pin and hole.

Vickers sling with MASH hooks.

Atlas B10 bipod. I will probably go with a Harris 6-9.

I am still looking for an optic. Probably go with a 12 or 16 power.





Edit due to spelling.......

Rate now:
tbugher62XSergeant
Rating: 3.1/5 this site
364 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
12:16 PM
[HR][/HR]
Sure wish I could come up with a reason too spend $$$ on one of those Proof Carbon barrel's.

Rate now:
Tahoe333XSergeant
Rating: 3.0/5 this site
364 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
1:51 PM Last edited 2:05 PM by Tahoe333
[HR][/HR]
It was on sale over the holidays ---- Sale-bwahhh - thats what I told my wife!

Considering it was shooting 2" at 100yds, I am not so happy with it right now.





Edit = added text.

Rate now:
Tahoe333XSergeant
Rating: 3.0/5 this site
364 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
1:53 PM
[HR][/HR]
It weighs in at 12.3lbs without mag or ammo.

Rate now:
 
Feb 11, 2017
113
7
18
#4
Aero m5 receivers
Ballistic advantage match grade 16"
Slr sentry 7 gas block
Slr solo lite 14" mlok rail
Geissele SDE
Magpul ACS
Pst 2.5-10x32 ffp in badger unimoint
Griffin Flashcomp for my recce 7

 
Likes: wmfirefighter

Wyzrd

Harder than a coffin nail
Feb 13, 2017
1,975
41
48
Cheyenne, Wyoming
#7
Here's one of my old AR10 rifles, built by RW Snyder... Badger brake, Brux barrel, Seekins AGB and tube, Apex Gator Grip handguard, SI Defense billet receiver set, Gieselle NM 2 stage trigger, JP SCS, Magpul STR, JP Bolt, wore a Steiner T5XI 5-25x56 in a QD mount, etc...
 

Attachments

Feb 15, 2017
1
0
0
#9
My lr-308 build.

Colfax tactical lower
Dpms upper
Fulton bcg
Black hole weaponry 24" bull barrel 1:11 twist
geissele ssa-e trigger
Jp Ben cooley comp
Jp modular hand rail
Slr adjustable gas block
Accu-tac Sr-5 bipod
Accu-shot mono pod
Standard buffer and spring
Phase5 battery assist lever
Bsa ffp 4x14 scope
Vortex scope level
Weaver 20moa riser
Custom machining on the upper for a side charging handle
Fulton armory side charging handle into the left side of the bcg.
Sniper gray cerakote

Took me about 3 years to get it all together, buying pieces when they went in sale. I know the scope is cheap I'll get a better one in the future.

.65" is the best 3 shot group I've had with 168gr PPU at 100 yards. I really need to get out more and get a good 5 shot group.



Sent from my SM-G935P using Tapatalk

 
Oct 4, 2012
380
2
18
49
Bay Area SF
#10
It looks like the SLR adj. gas block is hitting the rail causing random fliers.
I was thinking about trimming a small groove into the fat butter section of the rail.
I haven't been able to find a smaller gas adj. gas block.

My question is;
1-If I trim a u-groove into the end of the carbon rail, will this give me enough room between the gas block and the rail?
2- Can the carbon rail be trimmed without it splintering?



 
Oct 4, 2012
380
2
18
49
Bay Area SF
#11
Update - I just found out that the thick end of the rail has an aluminum sleeve on the inside the. I will cut a u-groove about half way through the aluminum sleeve.
 
Nov 4, 2012
113
1
0
38
Oregon
#13
I've been wondering how much impact does the gas block clearance really has. It's been common practice on bolt actions to check free float by running a dollar between the barrel and the stock. It makes me think now if such clearance is really not sufficient.
 
Likes: Lawless

AMP!

Three sheets to the wind
Feb 17, 2017
461
9
18
#14
Testing out the "old" site. My JP LRP-07. Has the dual charging upper. I picked it up from another hide member from the scout site. SAS suppressor, Burris XTR II 4-20 in AD mount.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i28.photobucket.com\/albums\/c208\/amphotericzenki\/IMG_0819_zpsswwbub9b.jpg"}[/IMG2]


I havent had time to really test accuracy, but I did shoot a quick MOA group out of the back of the truck off the cheap bipod when sighting it in. Smoothest AR platform I've shot yet.
 
Last edited:
Feb 13, 2017
18
2
3
Michigan
#16
Here's my AR10T.

PRS stock
MDT recoil pad
God-A-Grip cheek pad
ergo grip
Elftmann trigger
JP rifles silent captured recoil spring
SLR Sentry adjustable gas block
TBAC brake
thunder beast ultra 9 30 cal
Accushot monopod
harris bipod
Spuhr mount
Viper PST 6-24x50 (now has a 4.5-30x50 XRS)
 

Attachments

Feb 14, 2017
384
9
18
#17
[TABLE="border: 0, cellpadding: 0, cellspacing: 0"]
[TR]
[TD="width: 65"]Lower:[/TD]
[TD="width: 323"]H&H Billet DPMS style .308 receiver 80%[/TD]
[/TR]
[TR]
[TD]Upper:[/TD]
[TD]Aero Precision M5E1 Forged receiver complete[/TD]
[/TR]
[TR]
[TD]Handguard:[/TD]
[TD]Aero Precision 15" Keymod[/TD]
[/TR]
[TR]
[TD]Trigger:[/TD]
[TD]Geissele Super Tricon[/TD]
[/TR]
[TR]
[TD]Barrel:[/TD]
[TD]JP Supermatch 22" Stainless 1:10 twist / medium contour[/TD]
[/TR]
[TR]
[TD]BC Group:[/TD]
[TD]JP Supermatch LMOS with QPQ finish[/TD]
[/TR]
[TR]
[TD]Gas Block:[/TD]
[TD]JP low profile adjustable gas block (.936")[/TD]
[/TR]
[TR]
[TD]Spring:[/TD]
[TD]JP Silent captured spring system[/TD]
[/TR]
[TR]
[TD]Mount:[/TD]
[TD]JP 34mm one-piece billet scope mount[/TD]
[/TR]
[TR]
[TD]Buffer Tube:[/TD]
[TD]Aeroprecision rifle length extension[/TD]
[/TR]
[TR]
[TD]Stock:[/TD]
[TD]Magpul PRS[/TD]
[/TR]
[TR]
[TD]Grip:[/TD]
[TD]Larue A-Peg[/TD]
[/TR]
[TR]
[TD]Cerakote:[/TD]
[TD]Hand guard, grip and stock in FDE[/TD]
[/TR]
[TR]
[TD]Optic:[/TD]
[TD]Vortex Viper PST 4-24 x 50[/TD]
[/TR]
[/TABLE]

IMG_0851.jpg
 

unclemoak

The BCG Guru
Jan 13, 2008
18
3
0
Oshkosh, WI
#18
Aero M5 receiver set
KAC URX 3.1 rail
CMMG 16" barrel with a rifle length gas system
SLR gas block
Magpul MBUS Pros with the LR rear
One of the Nitride and NiB BCG that I manufacture
Geiselle SSA-E
Griffin Taper Mount
KAC 30mm scope mount
Nightforce NXS 3.5-15x50 - recently changed to a 5-25x56 ATACR
Vltor Bipod
Some standard Magpul furniture
Form 1 30 Cal can

 
Likes: wmfirefighter

kingzero

Smasher of Beavers
Apr 4, 2014
212
18
18
Crack Town, AZ
#19
My election panic buy.

Predator Technology Group billet receivers (my buddies company)
Mcgowen 20" Hbar
SLR gas block and 16" SOLO rail
Geissele 2 stage
MOE rifle stock
Houge grip
Bushnell LRS 3-12 G2


[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/VHV3lCX.jpg"}[/IMG2]

After Cerakote.......


 
Last edited:
Nov 4, 2012
113
1
0
38
Oregon
#21
What hand guard is that?
It's a JL Billet 308/AR10 15" Angle Cut M-Lok Handguard Low Profile. They also make a high profile to match uppers that require it. I was planning on going with their 17.2" model but wasn't sure if I would then have issues accessing the gas block.
 
Last edited:
Mar 2, 2017
82
6
8
#24
photo48646.jpg

My newest AR-10 in 308 20" Krieger Barrel and Bolt JP Bolt and silent capture USO ER-25 Geissele trigger Mega Maten OSS can Upper was assembled by Krieger
 
Last edited:

MSTN

Sergeant
Jan 31, 2010
896
73
28
MIDDLE OF ARIZONA
MSTN.BIZ
#28
A customer requested a lightweight .308 gas gun. So, here it is coming in at 7 LB 13.7 OZ: 40 ounce16" Bartlein 5R barrel with KAC length gas system; JD Machine billet upper & lower; Fortis Switch rail; JP FMOS BCG; Larue MBT; Vltor A5 with H2 buffer; everything V Seven makes in titanium, to include muzzle brake, push pins, grip screw, mag release, etc; SLR titanium adjustable gas block. Shapeshifter Finishing, as usual, did the excellent Cerakote.







 
Likes: Lawless
Mar 7, 2017
47
0
0
#32
photo49516.jpg photo49517.jpg My humble DPMS G2 SASS and her first 5 shot group at 100 yards. I wasn't done sighting in, but the range officer called 2 minutes till close of range for the day, so I quickly put 5 down range on my only fresh target. I am now certain that the gun shoots straighter than I do LOL
 

Attachments

Last edited:
Mar 13, 2014
9
10
3
#34
Mega MKM MATEN Mega Extended Rifle Length 16" Key Mod Set
-Geissele Hi-Speed National Match Trigger
-JP BCG with an HP bolt
-JP Silent Captured Spring (Heavy) W/Tungsten Weights
-Magpul AR 10 specific PRS stock
-Krieger 26" Heavy Match Contour 6.5CM 1 in 8" Sans Muzzle Break
-Nightforce 5.5-25 ATACR Enhanced MOAR-T Reticle
-Superlative Arms Adj. Gas Block
 

Attachments

Jul 2, 2012
1,078
62
48
38
world wide
#36
Here is my contribution.
-Mega ambi set
-Fortis 15" switch rail
-Seekins adj gas block
-20" Mega Arms barrel
-Aim nib BCG
-Geissele SD-E trigger
-Silencerco Saker
-Leupold mk8 in Spuhr sp4026 (I love that damn scope) [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/2uBRJAw.jpg"}[/IMG2]

She shoots like this with 178amx [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/1qKiwSY.jpg"}[/IMG2]

Pretty decent speed for 42.2 grains of varget in a LC LR case out of a 20" barrel [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/flrLKbX.jpg"}[/IMG2]
 
Last edited:
Mar 28, 2017
44
6
8
#37
My humble DPMS G2 SASS and her first 5 shot group at 100 yards. I wasn't done sighting in, but the range officer called 2 minutes till close of range for the day, so I quickly put 5 down range on my only fresh target. I am now certain that the gun shoots straighter than I do LOL
Wish my g2 recon shot that good

Sent from my LG-H901 using Tapatalk

 
Mar 7, 2017
47
0
0
#38
Wish my g2 recon shot that good

Sent from my LG-H901 using Tapatalk
Lol, I wish my SASS was as light as your g2 recon!

I'm extremely happy with it! I just worked up the FGMM 175 grain clone load I found on here and she is extremely happy with them :D

Now I just have to work on me and my accuracy ;)
 
#39
Once again, I am drooling over so much super nice hardware. Wish my budget would allow such elaborate builds. On the fly, and on the cheap (not according to my wife) I put together a pig gun because I could not afford to buy a new one. I had a shot out Bushmaster LR-308 that had a whole lot of round through it, stripped it down to it's smallest parts and refined, rebuilt, replaced everything I could afford to to create my Super Bushie! I took it down from a .308 to a 6.5 Creedmoor, and will never look back, I love it!
The link to the complete rebuild is kind of long, so here's a link to the whole story: image_53113.jpg
 
Last edited:
Apr 21, 2017
4
0
0
#40
I've fired most SASS platforms and she's definitely a keeper.
SF Edition 18" OBR in 308
Magpul PRS
Larue bipod
NF ATACR F1 5-25x w Tremor 3
M118LR hushed up w the Surefire can
Manfrotto tripod
(Missing clip on NVD,
Silencerco Radius / PEQ15 dep on mission requirements, sorry guys)
Right tool for the job gents.


Sent from my SM-G930V using Tapatalk

 
Mar 11, 2009
28
4
3
#42
My first build, 6.5 Creedmoor,
Aero upper
Alexandria lower
Ballistic Advantage 18 " barrel
superlative adj gas block
D Wilson BCG
Luth-AR stock
I did the hydro dip myself, first time don't think it turned out bad
now saving up for a Leupold scope 4-12x50 wind plex
 

Attachments

Sep 6, 2013
4
0
0
Tacoma,WA
#43
Here's my first build as well.

Aero M5E1 upper
Aero M5 Lower
Magpul PRS gen 3 stock
Ergo Tactical Deluxe Grip
Giessele SDE trigger
BCM Large gunfighter charging handle
Criterion 22" hybrid contour 6.5 creedmoor barrel
Sentry 8 adjustable gas block
JP High Pressure bolt
Thunderbeast Arms Muzzle Brake
Atlas BT10 Bipod

I just have to fatten my wallet a bit before putting a scope on it, looking at either the Vortex PST Gen 2 5-25 or Bushnell DMR ii with the G3 reticle.
 

Attachments

Jan 27, 2004
111
0
16
Fernley, Nevada 89408
#44
I am getting ready to take the dive and build my own AR 10, the information provided here will make my build a lot easier, there are a few things that you can get wrong, and then you find yourself chasing one thing after the other to get the rifle to run correctly; especially if the rifle is suppressed.
 
May 26, 2017
3
1
3
#46
Diamondback
DB10FDE

Parts added
-Leupold Mark 4 4.5-14 scope
-EGW HD rings
-Leupold riser
-Luth AR stock, so I could use a B&T monopod
-Atlas bipod
-Giessele, Hi speed national match trigger

The rifle looks great! and shots even better.

The first time at the range (after I sighted it in) I shot four consecutive groups at 100 yards with Federal Match 175 grain Sierra bullets. The first group was in the center, then top left. I put my Silencer Co Omega on and shot the only group not under an inch on the top right and the last group was bottom right.

 

Attachments

Jan 14, 2010
1
0
0
#47
Here's my .308 I've been working on and finally close to finishing. Getting ready to actually go test her at the range to see that she actually shoots.

Mega Maten receiver set
Mega 20" rifle gas barrel
SLR adjustable gas block
SLR Solo Rail
AAC Brake Out 2.0
Aero NiB BCG
A5SR RE
Magpul ACS stock

Parts on order:
atlas bipod and unipod with magpul adaptor

Still need to order:
Giessele SSA-E
Scope and mount
-between NF and S&B. Was set on a 4-16x42 but the amount of 5-25x56 I see here has me reconsidering.
-mount wise I believe it will be a Spuhr mount just need to figure out what MOA base the scope I end up with needs.

- Current scope and rings were borrowed from friend for photo and use while test firing.

Under consideration:
Looking into suppressor options. At the moment I'm leaning towards a TBAC Ultra 9 with CB mount.
BI SAPR attachment
<a href="http://s177.photobucket.com/user/WittieM/media/BA75091F-BBE8-4F0B-A123-020F65BB8A06.jpg.html" target="_blank"><img src="http://i177.photobucket.com/albums/w227/WittieM/BA75091F-BBE8-4F0B-A123-020F65BB8A06.jpg" border="0" alt=" photo BA75091F-BBE8-4F0B-A123-020F65BB8A06.jpg"></a>
 
Last edited:
Feb 27, 2013
12
1
0
Central Virginia
#49
My PRS "Gas Gun".
- Mega Arms MATEN Monolithic receiver set
- Christensen Arms 20" 6.5 Creedmoor Carbon-Fiber barrel
- APA Lil' Bastard brake
- Aero Bolt Carrier Grouop
- Tubbs Flatwire Action Spring
- Magpul PRS buttstock
- Harris 6"-9" Bipod with Hawk Hill feet
- Nightforce SHV 4-14x50mm
 

Attachments

Top Bottom