was thinking since i can put each one at different distances, i would do the 3inch one at 50yd must shoot off hand, then the next ones place them various distances up to 150yds which could be shot with the bipod, maybe put one of the smaller ones 4-5 inch one at 150 and figure out a point system for hits or do what u said about the kyl
We used to shoot 1/5th scale swinger silhouette "animals" with chickens at 100 yards, pigs at 125 yards, turkeys at 150 yards. and rams at 175 yards. Might try something like this.
Note: We shot the above with 22RF from a bench, 10 shots at each target. Stopped as too many possibles were shot and had to walk through a swampy area to place and retreave the ram and I am deathly afraid of walking up on an unseen snake.
Point of reference. Smallbore rifle silhouette uses chickens, pigs, turkeys, and rams at 40, 60, 77, and 100 meters, respectively.
Including the bases....the animals can be templated off of a rectangle the following size (HxW), but the actual hit area is smaller. Turkeys are the most difficult to hit.
- Chickens 4"x5"
- Pigs 5.3x8.3
- Turkeys 8.6x7.1
- Rams 10x12
All shots are offhand with no supports allowed. It's really pretty easy to hit them on a bench or any rest. Offhand is completely different.
We shoot them off hand . At 25 ,50,75,100 meters for IHMSA . 1/5 SCALE 3/8/ SCALE 1/2 scale with 22 LR .Pistol and rifle .
We shoot big bore at 50,100,150 and 200 meters
We put out 1/5 at the same distance shooting of the bench . as big bore .
most vids i have seen on kyl on you tube they are shooting off bipods target is at 30-50 yds and they still miss some, i know the target they are using is smaller than what im using, but thats why i plan on putting the bigger targets close the smaller ones at farther distance