22 Creedmoor shooters - any regrets?

Nov 19, 2013
1,009
157
63
#1
I'm close to pulling the trigger on some 22 cal barrel - just not sure if I should go for a fast twist 22-250 or 22 Creed.

Anyone shooting the 90+ grainers?
Optimal bbl length?
It looks Alpha is still behind producing brass - how involved is it resizing 6.5cm brass? Is it still better to fireform 22-250?

Overal, would you recommend it?
 
Likes: Skunkworx
Sep 6, 2006
2,437
619
113
Southern California
#2
Haven’t built or shot a 22 creed yet, but just wanted to add that peterson just released 6cm brass and Hornady has it as well. I’d personally pick the peterson. Starting with a 6mm brass would simplify your initial prep.
 
Dec 28, 2006
230
6
18
38
SW Oklahoma
#6
I regret not doing it sooner. I only slightly regret doing a 22" tube instead of a 24". Other than that, none at all.

My gun happens to like 69TMK very very much, squirting it at about 3525ish, with room to grow. SO far, the TMK is proving to be a killer, so my drive to play with heavier stuff hasnt been all that strong.
 
Likes: JCH

Codiekfx400

Sergeant of the Hide
Jan 29, 2018
538
173
43
#11
I have not ever reloaded a single rifle cartridge, much less delve into the wildcat world. BUT...the idea of this thing has me jacked to start into all of it!!
It's great to be excited but I would suggest if you have never loaded before to start out with a cartridge you are already shooting and learn the basics.
 
Likes: Lonestar1027
Oct 6, 2005
116
1
18
51
Richmond, VA
#13
I have a mentor that can help me with all the basics, while still getting this in the go along. If we decide that i'm better served just loading for 223 and see what happens then i'll do that until i get more proficient. Otherwise, its damn the torpedoes ....full steam ahead!!

*all kidding aside...i'm hoping the mentor will build one with me so we can do this as a group project
 
Likes: Codiekfx400

Codiekfx400

Sergeant of the Hide
Jan 29, 2018
538
173
43
#19
I have a mentor that can help me with all the basics, while still getting this in the go along. If we decide that i'm better served just loading for 223 and see what happens then i'll do that until i get more proficient. Otherwise, its damn the torpedoes ....full steam ahead!!

*all kidding aside...i'm hoping the mentor will build one with me so we can do this as a group project
A good mentor is priceless I have mentored a few individuals and it has been rewarding. I have some 22-250 brass that I would like to turn into 22 creedmoor someday funds are not abundant right now so it will be a future endeavor. Good luck
 
Jan 21, 2012
57
24
8
54
#20
I will be putting one together when I get the Nucleus action,I'll be using a 20" 1-8 twist Wilson Arms barrel. I've had 1200 75 gr AMax bullets setting around just waiting to be loaded.
 

Codiekfx400

Sergeant of the Hide
Jan 29, 2018
538
173
43
#26
I have never Shot a 22CM but being a wildcat caliber How is bullet performance I'm interested in the BC
We are not quite sure what your question is here. I would recommend getting a 223 remington of some variant and shooting it and learning as you go before jumping into a 22 creedmoor or any other wildcat for that matter.
 
Likes: Nodakplowboy

Subhunter2

Where da varmints?
Feb 14, 2017
100
14
18
East TX
#30
Faster than 250 ai, feeds out of aics mags great and no fireform= less rounds on your barrel for setup,

this is a hotrod, so barrel life is something people need to think about on this one, havent burned mine out yet, kinda hard when you only pull it once and it blows open evey animal ive shot,

Me and several others have tried the 90’s , and they could be downloaded to make a prs speed limit of 3200fps, but i still think the 90’s long bearing surface and the overbore characteristics of the 22cm will make for an even shorter barrel life span, especialy shooting 10rd strings fast,

not to mention, i dont even want to think about what an unlimited round count stage would do to the throat of the 22cm

Its bad ass on yotes and crows!!!
 
Jan 18, 2011
243
7
18
47
billings montana
#31
I have been running the 22x47L for the past five years,barrel life on both bartleins was right at 1300. This was running a 90 grain vld at 3150. I am sure the creedmoor will be in the same ballpark. Barrel life= accurate and consistent, not saying it still won't shoot past that, 1300 was the mark I started getting the weird flyers and velocity abberations.
 
Sep 1, 2011
181
40
28
Rockwall, TX
#36
Faster than 250 ai, feeds out of aics mags great and no fireform= less rounds on your barrel for setup,

this is a hotrod, so barrel life is something people need to think about on this one, havent burned mine out yet, kinda hard when you only pull it once and it blows open evey animal ive shot,

Me and several others have tried the 90’s , and they could be downloaded to make a prs speed limit of 3200fps, but i still think the 90’s long bearing surface and the overbore characteristics of the 22cm will make for an even shorter barrel life span, especialy shooting 10rd strings fast,

not to mention, i dont even want to think about what an unlimited round count stage would do to the throat of the 22cm

Its bad ass on yotes and crows!!!
Melonite?
 
Mar 20, 2014
30
1
8
#37
I am sending Travis the components for one this week.
LP razor
Manners Eh2
Hawkins DBM
Benchmark #5 1:7 @ 23”

224 is, I guess a “passsion” for me...the high bc bullets are fantastically fun and functional with little to no recoil...
I believe with the popularity of the Valkyrie the light will be shown on the benefits of longer heavier .224 bullets with velocities that yield amazing dope...also it will show manufacturers that we want twist rates to match “today’s bullets” and high bc’s. This performance will get the 22cm standardized...imo
no one seems to want to put a barrel on a 250 that will spin anything above 50gr...missing the boat on popularity of high bc .224 setups specifically the functionality of a 1:8 22-250 for varmints to deer...
I think a “new” caliber, ie the 22cm will allow them to offer a fast twist .224

I’m at 5k’ so I am hoping I can make the 90gr sierra’s work just to see what the 22cm will do
I did go with a SS barrel over a proof cf because I do anticipate lower life expectancy. If I love the round I may go with a cf in the future
I have a 22-250ai with a 1:8 rock and it won’t spin them 90’s too great but the 75 Amax is fantastic
I just picked up a 22-250 with a 1:7 bartlein 3b and it shoots the 80.5 vld’s less than .5”
I”ll have to see if I can get some velocity comparisons
I’ll be using Redding bushing dies and then get the .224 expander and a .224 seating micrometer. Unless I find a used set of whidden dies.

I think the benefits of the 22cm over the 22-250ai would make your decision the right one.
Factory brass or single pass forming are huge
Also mag feeding of the Creedmoor case is far superior to the 22-250ai
A 1:7” 22-250 with the 80.5 vld’s is a great option too! if you want more speed I’d go either ai or cm depending on how you feel about the above “benefits”
and your build specifics...BOTH have serious cool factor, imo!

Good luck!
 
Feb 19, 2017
148
26
28
southern IL
#38
I've been shooting a 22-250ai with a 7 twist for a little while now. Shooting 90 grain berger vld at 3199fps but have had them to 3400. I just got 500 of the new 95gr match kings in to try.

Recoil is actually a little less than my much heavier dasher, and ballistics are way better. Had it out to 720yrd so far and it did great.

I wanted a 22 creed but due to a friend of mine having the 22-250AI reamer and also gave me some fireformed brass, it was kinda a no brainer to go that route. You won't regret 22-250ai, 22 creed, 22 dasher, 22x47l, all are going to do it!! Just make sure you get enough twist to run these new bullets
 
Apr 6, 2014
179
48
28
#39
I've been shooting a 22-250ai with a 7 twist for a little while now. Shooting 90 grain berger vld at 3199fps but have had them to 3400. I just got 500 of the new 95gr match kings in to try.

Recoil is actually a little less than my much heavier dasher, and ballistics are way better. Had it out to 720yrd so far and it did great.

I wanted a 22 creed but due to a friend of mine having the 22-250AI reamer and also gave me some fireformed brass, it was kinda a no brainer to go that route. You won't regret 22-250ai, 22 creed, 22 dasher, 22x47l, all are going to do it!! Just make sure you get enough twist to run these new bullets

Let us know how the 95gr SMK's run for you.... Please. Thanks.
 

Nortex

Sergeant
Jun 2, 2010
868
31
28
WF, Texas
#45
I've ran a good amount of 90gr vld through my 22. I got in a pinch and even slowed it down (3096 vs the 3300) for a prs match which it shot great at. I have zero regrets. It is very fun to shoot.
 

Nortex

Sergeant
Jun 2, 2010
868
31
28
WF, Texas
#49
I got a couple different loads with 90gr vld withba 24" Broughton. 3250 with IMR4451 and 2 nodes running rl26 at 3096 and 3300. It's a hammer either way. Rl26 is great for speed but doesn't seem as temp stable as other common powders. It seemed to have bands/windows where it it's fairly repeatable though.
 
Likes: Subhunter2