Results 1 to 4 of 4

Thread: 300 RUM detachable magazine

  1. #1
    Sergeant
    Follows
    0
    Following
    0
    SICARIO's Avatar
    Join Date
    Jan 2010
    Location
    Oregon, USA, etc.
    Posts
    165

    300 RUM detachable magazine

    I have a rem700 in 300RUM. I'm thinking of addin one of the detachable magazines by badger (assuming it'll work for the RUM).

    Has anyone done this with good results? It would be nice to have more than 3 rounds, plus I seem to have issues with the last round feeding correctly.

    Thanks
    __________________________________________________ __________________________________________
    NW Expeditions

  2. #2
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    Jul 2009
    Location
    Oregon
    Posts
    979

    Re: 300 RUM detachable magazine

    Try Seekins BM for the RUM
    41

  3. #3
    Private
    Follows
    0
    Following
    0

    Join Date
    Jun 2011
    Location
    salem, OR
    Posts
    7

    Re: 300 RUM detachable magazine

    The badger mag does not work on the 300 rum, It is set up for the 338 lapua and the lapua shoulder is shorter than the rum and the mag has rolled sides for strength and it hits the case on both sides up by the shoulder if tha makes any sense. I bought one and did not want to mill out the rolled beads on the mag. I have a sendero and had the same problem with the last round feeding it was the follower. Go to midway and order product# 435964 it is milled solid and not one of those tin pieces of shit.

  4. #4
    Sergeant
    Follows
    0
    Following
    0
    SICARIO's Avatar
    Join Date
    Jan 2010
    Location
    Oregon, USA, etc.
    Posts
    165

    Re: 300 RUM detachable magazine

    Originally Posted By: elkcraz
    The badger mag does not work on the 300 rum, It is set up for the 338 lapua and the lapua shoulder is shorter than the rum and the mag has rolled sides for strength and it hits the case on both sides up by the shoulder if tha makes any sense. I bought one and did not want to mill out the rolled beads on the mag. I have a sendero and had the same problem with the last round feeding it was the follower. Go to midway and order product# 435964 it is milled solid and not one of those tin pieces of shit.


    You're right. I contacted Badger Ordinance and they confirmed that it cannot be used for the 300 RUM. Thanks for the info.

    Anyone have experience with Wyatt's Outdoor detachable magazine. Their website indicates that the long action bottom metal is only good for 338LM, but on Stocky's website, it shows 300RUM/338LM.

    Thanks,
    __________________________________________________ __________________________________________
    NW Expeditions