Results 1 to 5 of 5

Thread: M5 Stealth DM M24 Detachable Magazine System

  1. #1
    Private
    Follows
    0
    Following
    0

    Join Date
    Nov 2011
    Location
    trondheim, norway
    Posts
    39

    M5 Stealth DM M24 Detachable Magazine System

    Hi ive got some questions about this system.
    Im looking to buy a bell & carlson medialist tact. stock for my Rem. 700 in .280 remington.

    Will i need to modify it for inletting? Should i go for the BDL floorplaste or the DBM detach. magazine?

    Also this rifle will become a .338 Edge in a couple of years. Can i just change the magazine to a .338 Lapua (i know the mag needs modding) or do i need a whole new bottom metal?




    http://www.stockysstocks.com/servlet...-DM-M24/Detail

    http://www.stockysstocks.com/servlet...ctical-/Detail


    thank you

  2. #2
    Private
    Follows
    0
    Following
    0

    Join Date
    Nov 2011
    Location
    trondheim, norway
    Posts
    39

    Re: M5 Stealth DM M24 Detachable Magazine System

    Nobody has any experience with this magazine system?

  3. #3
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    Feb 2009
    Location
    Mississippi
    Posts
    836

    Re: M5 Stealth DM M24 Detachable Magazine System

    Your stock has to be inletted for badger bottom metal for this dbm to fit. If it is inletted for factory bdl then you need to get a dbm system that works with that inlet. I believe hs precision and the m4 series are for bdl inlets.

  4. #4
    Private
    Follows
    0
    Following
    0

    Join Date
    Nov 2011
    Location
    trondheim, norway
    Posts
    39

    Re: M5 Stealth DM M24 Detachable Magazine System

    I just found out the stock was short action only [img]<>/frown.gif[/img] i'll stick with my old ADL HS kevlar then, and just install the mag kit on that. Will be harder, but the stock has been ghetto-extened to fit my long arms anyways.

  5. #5
    Sergeant
    Follows
    0
    Following
    0
    KelsonAK's Avatar
    Join Date
    Jan 2012
    Location
    Anchorage, AK
    Posts
    200

    Re: M5 Stealth DM M24 Detachable Magazine System

    These are made by PT&G. I have found them to be very helpful in answering questions over the phone. I picked one up for a SA and it works perfectly well.