Page 2 of 4 FirstFirst 1234 LastLast
Results 51 to 100 of 187

Thread: E. Cohen, Dakota Scimitar 260 Medium Tac Build

  1. #51
    USA F-Open Rifle Team
    Follows
    0
    Following
    0

    Join Date
    Apr 2009
    Location
    Bellingham, Washington State, USA
    Posts
    462

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Outstanding stuff!

    Gives guys a thirst for CNC mills [img]<>/smile.gif[/img]

  2. #52
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: Papagrizzly
    Outstanding stuff!

    Gives guys a thirst for CNC mills [img]<>/smile.gif[/img]



    Sell some chit! [img]<>/smile.gif[/img]

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  3. #53
    Sergeant
    Follows
    0
    Following
    0
    wilsey's Avatar
    Join Date
    Jan 2011
    Location
    Sioux Falls, SD
    Posts
    119

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Amazing work again Chad!

  4. #54
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Thanks!

    Finished up the floor metal. Here's the inlet work on the stock and piece as its being fitted. Still a little ways to go yet in the back to get everything caught up.








    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  5. #55
    Gunny Sergeant
    Follows
    0
    Following
    0
    mdesign's Avatar
    Join Date
    Nov 2004
    Location
    Nebraska
    Posts
    2,045

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Interesting project Chad...fun to watch. Kinda been thinking about a 260 build anyway.

  6. #56
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Man, seriously crazed. I'm loving it.

    Exactly what I was hoping for.

    Thanks Chad

  7. #57
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    May 2012
    Location
    western nd
    Posts
    134

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    all i can say is... dude! i seriously want one

  8. #58
    Private
    Follows
    0
    Following
    0

    Join Date
    Jul 2012
    Posts
    32

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    That deal is just Badass all the way around.

  9. #59
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    Sep 2011
    Posts
    457

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Love these unique builds, good stuff ^^
    Longrifles Inc.
    Badger M2013
    Bartlein 17" .308, 22" 7-08
    KRG W3 Gen3

  10. #60
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: Hennig
    Love these unique builds, good stuff ^^


    Me too; one of my reasons for going with Chad. I wanted a true custom piece, and one that was as much art as a precision tool. Very different than just bolting in parts.

    I've greatly enjoyed being part of the process and am really looking forward to getting it home.

    All in all a neat experience

  11. #61
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Back to our little pet project.

    November was made of bitch. Just sucked as I all did all month was fix shit and hemorrhage money.

    December is proving much more lucrative. A good thing.

    BACK TO WORK!


    So, the 7mm-300WM we did recently proved a nice platform for testing out the cheek hardware. So nice that I've decided to make another for this gun. I've changed a couple little things, but essentially its the same.

    Here's the 1st op:







    Just finished it, bout to buzz it off with a miter saw.

    Woo hoo!

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  12. #62
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Way cool and nice to be back under way

  13. #63
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Cheek piece is all done, now onto the buttplate assy.

    Here's how it shaped up:





    Honing the pin bores:










    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  14. #64
    Private
    Follows
    0
    Following
    0

    Join Date
    Aug 2011
    Location
    Indiana
    Posts
    94

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    I bet you take it for granted at this point, but it must be really cool just to know how to whip stuff like that up. Nice work!

  15. #65
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Never take it for granted, just thankful the ability to do this kind of stuff.

    Thanks for the kind words.


    Onto the buttplate assy. Using one of my mentors for inspiration (The world renowned ALEX SITMAN (supah badass guy)) I'm looking at his 3axis buttplate assy and dissecting it, trimming off the "fat" so that it's more appropriate for a tactical gun.

    Here's the 1st step: Sorting out the profile of the Manner's T5 A stock. Using a tracing made directly from the stock I photograph it and import the photo into the puter. From here its a matter of cleaning up the lines/arcs and scaling the image to the proper size.



    Now onto making the wigit work. . .


    More to come.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  16. #66
    Sergeant
    Follows
    0
    Following
    0
    Jmilera's Avatar
    Join Date
    Jan 2012
    Location
    Texas
    Posts
    456

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Chad any chance the African 7 mm rem mag on the other tread was mine? ??
    Thanks joe pm inbound
    956 Golden Triangle
    Don't take things personal

  17. #67
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    I just took a look at the three way but plate: all I can say is WOW. Chad, you're amazing. Thanks for building your version for my rifle.

    Doc

  18. #68
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: virulentus
    Chad any chance the African 7 mm rem mag on the other tread was mine? ??
    Thanks joe pm inbound


    Joe,

    That's a dakota arms model 76 action in 416 rigby from last year. Were getting closer boss. I'm just playing a little catch up right now. Not too much longer bud.

    C.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  19. #69
    Sergeant
    Follows
    0
    Following
    0
    Jmilera's Avatar
    Join Date
    Jan 2012
    Location
    Texas
    Posts
    456

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    He'll yea call ya tomorrow I got bitten by the 338 lapua bug!
    956 Golden Triangle
    Don't take things personal

  20. #70
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    I gots the reamer for 250's, 300's,

    Easy stuff.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  21. #71
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Here's the baseplate all finished up:

    Again, having a "long leash" helps with projects like this as it allows/encourages the creativity to come out. The plan here is to emulate the one that Alex Sitman makes, but to put a twist on it so that were more aligned with the "tactical" theme.

    Sooo, instead of making an additional piece that attaches to the outside of the base plate (containing the clamp mechanism for the pin) were going to put it inside the stock for a simpler/cleaner appearance and shed some weight off the bugger.

    Here's the base plate. I had some fun with it by overlaying our proprietary "holographic" camo pattern onto the part and engraving it into the material. Subtle, but kinda neat.

    My "fixture" was a scrap/setup piece of AL used earlier this year to proof out an engraving program I used while making award plaques for the ordnance crews at Ellsworth, AFB.

    Machined blank fully profiled and qualified:




    Camo pattern from a random stencil:


    Engraving:


    Final piece:

    Looks "fuzzy" from me brushing it with scotchbrite afterward. Once its blasted/coated it'll clean up nice.






    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  22. #72
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    More progress.

    Clamps are done as is the vertical adjustment base for the recoil pad. One piece left to make.

    Woo Hoo, all that's left is inletting the stock for this chit, some sanding/fluff/buff, and were ready to squirt paint!








    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  23. #73
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Done! (with the hard part anyway)

    Going home!






    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  24. #74
    Sergeant
    Follows
    0
    Following
    0
    John L's Avatar
    Join Date
    Apr 2010
    Location
    MI
    Posts
    323

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Chad,
    I like the slimmed down look of that butt plate. Always liked the Sitman/Masterclass unit over the Tubb plate but felt both were too bulky for what they are asked to do. Yours looks like a very nice compromise.

  25. #75
    T J
    T J is offline
    Sergeant
    Follows
    0
    Following
    0
    T J's Avatar
    Join Date
    Sep 2010
    Location
    Gillette, WY
    Posts
    433

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    The engraved camo pattern is pretty bad ass. I haven't seen that before. Keep those pics coming, this build is definitely "outside the box". Well done Chad.


    t
    "A vote is like a rifle: its usefulness depends upon the character of the user."
    --Theodore Roosevelt

  26. #76
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: John L
    Chad,
    I like the slimmed down look of that butt plate. Always liked the Sitman/Masterclass unit over the Tubb plate but felt both were too bulky for what they are asked to do. Yours looks like a very nice compromise.


    John,

    Alex and I talked it over yesterday in fact. I do like his stuff much more than other versions and for a target rifle it is a very appropriate piece I think.

    Tactical stuff however kinda demands a more simplistic and compact approach. Least I think it does. Its for these reasons I decided to tackle this. So far its come out well. The base plate is now fitted to the stock. Just waiting on the brass pillars to setup. (bedded/glued in)

    I'm onto fitting the cheek hardware now. I whipped up a neat looking boss for the buttplate LOP adjustment/pinch screws. I'm chomping at the bit for this epoxy to harden so that I can fit it up and get a "real" picture of how this thing is going to end up. So far I'm diggin it.

    I was able to shave off a solid 7oz over the MC piece. I could swiss cheese it a bit more and get some more weight out of it, but I think I'm going to leave it. At some point it gets a bit silly. -That and the costs can get carried away as well. It is just a buttplate. .

    Later!

    C.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  27. #77
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    A few updates to wrap up the day.

    The morning started with getting the backing plate mounted up along with the internal hardware. The horizontal mill I acquired this summer makes this a snap. No complicated fixtures anymore.





    Got the ferrules installed and let the stock sit for a few hours to allow the epoxy to cure before the trial assembly.

    This allowed me some time to make a few other wigits for this gun. I like the look of beveled bushings where accy parts get snugged, clamped, adjusted, whatever. So, I devoted some time to whipping up a handful for the various pieces.

    First was for the buttplate LOP adjustment.



    Next, the cheek hardware:



    Finally, I bushed the bottom holes where the cheek pins run. I decided to poke these all the way through because it allows one to position the side/side of the cheek hardware without removing it from the stock. This way you can lock it down and know it didn't move. Might be kinda silly, but since were turning this thing into a hardware store, what the hell. . .



    I also finalized the pin base clamping arrangement. I silver soldered in the screws so that they never back out/vibrate loose.





    Were getting very, very close to being able to put this bugger together to check all the particulars.

    Left to do:

    Make/install the brake
    attach the recoil pad to the buttplate assy
    drill/tap the buttplate vertical set screw adjustment
    fit guard screws
    inlet the cheek piece (this particular piece was already inletted so I filled it up today so that I can machine it to fit our unit)
    Make the scope base
    trial assembly
    Test fire
    Tear down, fluff/buff
    Paint/finishing.

    Could possibly have it in primer tomorrow afternoon. I plan to work as next week is a full plate.

    Eric, it's coming along well and I hope you like what you see. As always, if something doesn't sit right, just give me a call.

    A good day, got lots of chit done.

    C.


    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  28. #78
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Wow; when you get rolling you really get rolling! Looks great. Exactly what I was hoping for in a truly custom rig.

    Can't tell you how much I appreciate this.

    Eric

  29. #79
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    Sep 2011
    Posts
    457

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Thats tidy Chad - really, really tidy. Love it.
    Longrifles Inc.
    Badger M2013
    Bartlein 17" .308, 22" 7-08
    KRG W3 Gen3

  30. #80
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Thank you.

    Making the QD base for bipod next.

    First, Kalli, the dog, and I are going out for coffee. Its a Sunday ritual.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  31. #81
    Sergeant
    Follows
    1
    Following
    0

    Join Date
    Apr 2005
    Location
    East Africa
    Posts
    924

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: C. Dixon
    the dog


    Hesco?
    Learn to swim, I'll see you down in Arizona bay

  32. #82
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Hesco, yes.


    Here's the bugger semi put together. Finished up the scope base today along with the QD mount for the Atlas bi pod.

    PICS:














    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  33. #83
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Starting to look insane. Just what a "custom" from you should look like. Certainly gonna be the bell of my ball.

    Kinda neat when a crazed builder and a crazed customer get together.

    Doc

  34. #84
    Private
    Follows
    0
    Following
    0
    average_freak's Avatar
    Join Date
    Jun 2010
    Location
    A place called Oceanside
    Posts
    0

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    OMFG....

    I can't wait to see this thing finished. At what point do you start considering this stuff artwork?

    Thanks again for sharing this with all of us. Still trying to wrap my head around the Scimitar design.
    Deus Impeditio Esuritori Nullus (No God Can Stop a Hungry Man) ...

  35. #85
    INFIDEL
    Follows
    1
    Following
    0
    sawman556's Avatar
    Join Date
    Mar 2012
    Location
    Bucks County, PA USA
    Posts
    1,126

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Paint that fucker!!! It looks awesome!!!
    ~ Patrick ~

  36. #86
    Gearhead
    Follows
    0
    Following
    0
    E. Bryant's Avatar
    Join Date
    Oct 2010
    Location
    MI
    Posts
    1,171

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Damn, that looks beautiful.

    I also like the GMT400 parked in the background. I still miss my '96 GMC K2500.

  37. #87
    Sergeant
    Follows
    0
    Following
    0
    Jethro3898's Avatar
    Join Date
    Jul 2011
    Location
    Dothan, AL
    Posts
    299

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    I really like that action......

  38. #88
    lw8
    lw8 is offline
    Sergeant
    Follows
    0
    Following
    13

    Join Date
    Sep 2010
    Location
    TN
    Posts
    298

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Wow.

  39. #89
    USA F-Open Rifle Team
    Follows
    0
    Following
    0

    Join Date
    Apr 2009
    Location
    Bellingham, Washington State, USA
    Posts
    462

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Your work's just plain RUDE, Chad!!

    Ooozing of talent [img]<>/smile.gif[/img]

  40. #90
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Fitting the recoil pad this am.

    Couple things to do yet:

    Attach/grind the recoil pad
    Thread/chamber the 2nd barrel (Ordered Monday, should be here by Friday)
    One last trial assembly
    Engrave both barrels
    Paint.

    Will have it in primer/base color by COB today. Pics to follow.

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  41. #91
    Sergeant
    Follows
    0
    Following
    0

    Join Date
    Dec 2011
    Location
    NC
    Posts
    674

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Is that a 2-door sport in the shop? I like your style Chad!

  42. #92
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Yes, with a brand new 383 smallblock. [img]<>/smile.gif[/img]

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  43. #93
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    She's in primer.

    Shot it this am and let it flash out. Filled in the boogers, sanded again, and primed for good in preparation for the base coat.

    It's drying now. In a few minutes I'll scotchbrite it and we'll have some Desert sand on this bugger.




    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  44. #94
    Registered Coonass
    Follows
    0
    Following
    3
    RADcustom's Avatar
    Join Date
    Jun 2008
    Location
    Louisiana
    Posts
    1,896

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: C. Dixon






    For a second there I thought this was going to be some kind of Christmas pattern. Candycane cammo. [img]<>/laugh.gif[/img]
    The #1 Man in the #2 Business.

    Originally Posted By: kahekili
    I guess if my ammo is exchanged for freedom, then I would have to say I got a great return on my investment...

  45. #95
    Online Training Member
    Follows
    0
    Following
    0

    Join Date
    Dec 2010
    Location
    Sedona, AZ
    Posts
    254

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Nah; no candy cane. The local carnivores wouldn't know what to do with that.

  46. #96
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Base color is on it. Were rollin again in the am.

    Solid!

    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  47. #97
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Base and 2nd color setup:










    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  48. #98
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Just about ready for the 3rd color.

    Progressing well.








    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

  49. #99
    Private
    Follows
    0
    Following
    0
    wildcats's Avatar
    Join Date
    Mar 2005
    Location
    Honolulu,HI
    Posts
    84

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    Originally Posted By: C. Dixon
    Kalli's a moped kinda girl. [img]<>/smile.gif[/img]

    I bought here a 1981 Honda Express this summer and if its nice out you can't get her off the damn thing.

    This winter we'll be tearing it down and restoring it. If she lets me I'm going to build a water cooled big bore cylinder for it, bump the compression a bit, find a tuned pipe I can "Frankenpipe" onto it, and maybe put a 5-10hp shot of silly gas to boot. I've got a 19mm Delordo carb for it already.

    What a fun way to end up in the ER right??

    Back to programming. . .


    Please,Don't forget the wheelie bars....LOL

  50. #100
    Gunny Sergeant
    Follows
    2
    Following
    0

    Join Date
    Mar 2010
    Location
    Sturgis, S. Dakota
    Posts
    3,972

    Re: E. Cohen, Dakota Scimitar 260 Medium Tac Build

    One color left. . .





    "Bring extra funds to replace whoevers steel you're gonna fuck up with that thing."
    -Killswitchengage

Page 2 of 4 FirstFirst 1234 LastLast