Search results

  1. Ironman308

    Nucleus/Mausingfield Bug Nut Bartlein Barrel 6.5 Creedmoor

    I have attached three pictures. The first two are to show you the base of the barrel diameter which should be 1.25. My calipers are too wide will not go down into the area between the shoulder of the barrel and the beginning of the threads. The best I could do was to use an old set of...
  2. Ironman308

    Nucleus/Mausingfield Bug Nut Bartlein Barrel 6.5 Creedmoor

    American Rifle Company site shows the Barloc Nut being " Designed as a direct substitution for Savage small and large shank barrel nuts." I am not sure how that would effect this barrel with the Bug Nut system. I suggest that you contact them to verify. Thank you for your interest. I apologize...
  3. Ironman308

    Nucleus/Mausingfield Bug Nut Bartlein Barrel 6.5 Creedmoor

    I have a Bartlein Bug Nut 6.5 Creedmoor 24" barrel for sale for $475 shipped plus pay pal fees. From previous sale: "New/unfired Bugholes Bartlein Bugnut (w/wrench) Barrel for savage small shank - 6.5 Creedmoor pre-fit, 24” threaded muzzle 5/8-24, 1:8 twist, Remington Varmint contour... one...
  4. Ironman308

    CZ 455 22LR +2 mag extensions

    Interesting addition, good work. It appears that these extend the magazine by an inch or so. Could you take a picture side by side with a factory 10 round magazine.
  5. Ironman308

    Bullets unseating in AR10 when chambering

    I did this, tested dry and with graphite and noticed little difference. I also called the Hornady and asked them how they get their neck tension seeing that I saw less movement with factory rounds. I was told the procedure was not able to be reproduced by the reloader.
  6. Ironman308

    Bullets unseating in AR10 when chambering

    Subwrx300, I called Tubbs and found that they only offer one spring so that is easy. What buffer/weight did you use. They recommended a T2 and I just wanted to check with you before I made the purchase. I'm trying to not end up with a box of buffers and springs to fix this issue with my JP rifle.
  7. Ironman308

    Bullets unseating in AR10 when chambering

    I have the same problem. There is even a slight movement with factory rounds. I have not tried different springs or buffers yet.
  8. Ironman308

    Bighorn TL3 / XLR Shouldered and Prefit Switch barrel testing/review

    Thank you for doing this test. I built 6.5 Creedmoor with the Remage barrel and am getting ready to build a 6BR with the Origin action using Criterion Savage barrel. It is nice to see you confirm my thoughts that the barrel nuts work well and interesting the difference you have found so far...
Top Bottom