Search results

  1. Iamero

    Anyone a motorcycle troubleshooting guru?

    I disconnected them and capped the wires and it didn’t make a difference on this one. I’m going to get new coils, boots, and fuel lines and filters and see if anything happens.
  2. Iamero

    Anyone a motorcycle troubleshooting guru?

    I pulled the plugs and checked their spark. Definitely plenty there and bright blue. What I can’t get over is how it was running like a top 3 days ago.
  3. Iamero

    Anyone a motorcycle troubleshooting guru?

    Might be a dumb question but where is the condenser typically located?
  4. Iamero

    Anyone a motorcycle troubleshooting guru?

    Plugs are looking pretty good. Perhaps a little lean but when I just pulled one there was some gas on it so it’s not completely dry. I disconnected the LED taillights just in case I screwed something up with the circuit but that made no difference. I just attempted to start it again and it...
  5. Iamero

    Anyone a motorcycle troubleshooting guru?

    Yea put LEDs on there. I don’t see any wires pinched. Whatcha thinking?
  6. Iamero

    Anyone a motorcycle troubleshooting guru?

    Not 100% sure on the air filter. All I know is that it desperately needs a new one after I pulled it to clean it. I tried running it without a filter in case it was running rich. I pulled every jet I could get out (3 total) and I can see through every one. I used a guitar string to run through...
  7. Iamero

    Anyone a motorcycle troubleshooting guru?

    Hey guys, just made a profile over on Hondashadow.net as well and hopefully will get some answers once I get my lost count up, but figured I would check here too. I took an old 1985 Honda Shadow VT700C and converted it into a bobber. Rebuilt the carb when I got it and got all sorts of crap out...
  8. Iamero

    WTB Beater NF NXS or similar

    PM sent
  9. Iamero

    Bushnell LRS 6-24x50

    Is that the 1/4 MOA mil dot combo?
  10. Iamero

    PRICE DROP MDT ESS Chassis Long Action Remington 700

    Any idea if that high rail will fit a Stiller?
  11. Iamero

    WTT 34mm rings for 30mm

    I need at least 1.35” so I think those would be too low.
  12. Iamero

    WTT 34mm rings for 30mm

    I’ve got several sets of 34mm rings and I need a set of 30mm between 1.35-1.5”. I’ve got the following to trade for ones of equal value, or I’ll add cash if you have something like a Spuhr. I don’t need any cant, I already have 30 in my base. - Nightforce 4 screw 1.5” 34mm - vortex PMR .92”...
  13. Iamero

    R700 HS Precision HTR - 300 Win mag barreled action

    Would love to trade this for a nice optic too. Medium to long range.
  14. Iamero

    WTB post-64 win70 short action

    Bump
  15. Iamero

    WTB Beater NF NXS or similar

    Also looking for a DMR Gen 1 with g2
  16. Iamero

    WTB Beater NF NXS or similar

    Looking for a scope that I can rattle can with a gun I have. I just can’t bring myself to do it to a Schmidt or other top tier scope. Looking for another scope that has been painted already or could use some TLC (as long as the tube/bell isn’t dented or bent). Something like an old non ZS or HS...
  17. Iamero

    R700 HS Precision HTR - 300 Win mag barreled action

    Thanks! Up top for the afternoon crowd. I've got two 300s now and really need to start slimming down the safe again.
  18. Iamero

    WTS: LNIB SA 1911 Range Officer Operator in 9mm

    Tagging in case trades open up.
  19. Iamero

    Action for a .300 WM build

    I have one that's like new on a Stiller Tac300 if you're interested in just buying a complete one.
  20. Iamero

    WTB post-64 win70 short action

    Just as the title says. As long as the metal isn’t terribly pitted, I’m pretty much open to any condition, any bolt face. Got a stock and barrel sitting here and want to do another build soon. Let me know what you have. Got a killer deal on one recently, hoping for another!
Top Bottom