Search results

  1. Rob01

    22 Ammo Testing Procedures

    Yup you have to test at longer ranges. Just because at 50 it shoots good doesn't mean it will farther. I test at 50, 100, 150 and 230 on steel as those are the ranges I have. I don't chrono all of it but enough to get numbers like with centerfire. I wasnt to keep my SD in single digits. Found a...
  2. Rob01

    Scope Ring Spacing

    I put them in the middle of the tube between the knobs and objective and power ring. Not too close to either. Never an issue. And that .50 flex video if you look it appears the mount isn't attached but semi free floating.
  3. Rob01

    actual MV on 168g .308 20" barrel

    My 20" sends the 168 AMAX factory ammo out at about 2650fps.
  4. Rob01

    FS 660 pieces of Once Fired .308 Lapua Brass SPF

    Good for someone with a .260 or 7-08 too. Easy forming.
  5. Rob01

    FS 660 pieces of Once Fired .308 Lapua Brass SPF

    SOLD PENDING FUNDS Have 660 pieces of once fired Lapua .308 brass. It's large rifle primered. Has not been tumbled or sized. New is going $80-90/100 so I would say around $250 shipped to lower 48 would be a fair price for all this brass. Drop me a PM if interested or have questions. No paypal...
  6. Rob01

    Vudoo Gun Works V-22 Rimfire Bolt Action

    Thanks. No issues down to 30 yards we shot in the match with the 4.5-27x Razor. The 3-18 and AMG 6-24 both go down to 25 yards but dropping power can allow all to work closer. Had done with with other optics in matches over the years having to shoot down to 11 feet.
  7. Rob01

    What .22 zero

    Yup my 25 yard is 0 correction from my 50 yard zero.
  8. Rob01

    What .22 zero

    I zero at 50. Find it's a good spot to get a solid zero for elevation and not to much effect from wind. Has worked well. Not shooting inside 25 yards most of the time and shooting out to 300+ so a 50 yard zero works well.
  9. Rob01

    6mm Creed at distance in the wind.

    He was using the factory Hornady 108 load. Good shooting. The 108 ELD load shoots great in my rifle too.
  10. Rob01

    Vudoo Gun Works V-22 Rimfire Bolt Action

    We were emailed them but I will try and cut and paste them here. Stage 1: Eggcellent Positions Start position: Heels on marks rifle at low ready with magazine inserted bolt open, semi-auto magazine inserted bolt closed on empty chamber. Stage procedure: Upon signal engage each egg array with...
  11. Rob01

    6.5 Creedmoor 147 Gr ELD-M. RL16, RL26, H4831SC, H4350 Test and Data

    Is that .002" off lands or a misprint of .020"? If .002" then try them at .020" off. The ELD-Ms don't need to be jammed into the lands or even very close. The factory loads that are about .090" off the lands shoot great in my rifles. 5 SHots when I started working up my 147 load. Velocity was...
  12. Rob01

    Vudoo Gun Works V-22 Rimfire Bolt Action

    Got a 1st and 2nd place finish for Team Vudoo yesterday at the Lapua PRC at Peacemaker. Great rifles made it easier! Here's the stage sponsored by Vudoo.
  13. Rob01

    Hornady 4DOF users - how are you liking this?

    Then that's what to your spin drift is at that range for all inputs and bullet selected. Seeing as you will never have 0 wind at that range it wil get absorbed into the wind call anyways.
  14. Rob01

    Hornady 4DOF users - how are you liking this?

    Check barrel twist in program. Will effect the spin drift.
  15. Rob01

    Which Scope?

    Bring them outside if you can and look at something a little ways off to get a better idea.
  16. Rob01

    Scope Height Question

    Yup doesn't matter in use.
  17. Rob01

    Which Scope?

    Yeah that's an excellent price on that optic even used. Even better as it's in your price range. You can;t go wrong with the Razor II scopes but you need to choose the reticle you like as that is important. I personally don't like a more cluttered reticle as too many lines gets confusing for...
  18. Rob01

    Which Scope?

    Here's a pic of a similar Vortex 2C reticle in my PST at 400 yards. The steel is 8". The sight picture is not as clear as the Razor II as it is a Gen 1 PST but it gives you an idea of what it looks like on targets. The small open center is nice for very small targets.
  19. Rob01

    Scope Height Question

    Not always. Scopes can be mounted down low near barrel and not work at all for a shooter no matter what the stock as most are fine going up but don;t go lower. The old "has to be as close as possible" mind set is just that, old.
Top Bottom