Search results

  1. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    200 pieces at the moment
  2. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    I wish him the best, I hope he does well. I'm glad his 416 is running faster and he's doing well with his project. Cheers
  3. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    198 grains of H50BMG per round and I wanted it to be 100% of a hot day on the range for finalizing load development so we can run cool and have no pressure issues or stress to brass to fight with. So far the 400s are running up to 3480 fps with no signs of a sticky bolt or primers going south...
  4. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    4 Hours and 22 Minutes at 94 degrees they should be ready for testing
  5. oneshot.onehit

    Windows based phone recommendation

    I use a Panasonic FZ-E1 with Cold Bore Cheers
  6. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    If I am reading this all correctly- your brass that is now loaded for a second time is showing signs of pressure but didn't show it on the first go around. If this is the concern and you are trying to figure out why? Number one - your brass is now fire formed to your particular chamber - you...
  7. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Geno It was great getting together and pulling the trigger, did you have any ammo left ? Cheers
  8. oneshot.onehit

    375 SnipeTac or Cheytac?

    Interesting enough we have ran 100s of rounds down the barrel on a 375 Snipetac and never had a hang fire issue, our round had a low single digit ES numbers using Reloader 33 and Federal Large Rifle Magnum primers. The only advantage to running a Snipetac over a standard 375 Cheytac is if a...
  9. oneshot.onehit

    375 SnipeTac or Cheytac?

    Now I may be mistaken but Didn't you have a 375 VM2 that Dave Viers built? Oneshot
  10. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Even though the concept is a desire in the ELR world I watched a demo on the operation of the scope - the whole physical scope pivots in the center of the mass located by the turrets- similar to the motion of a tetter-totter at a park or school. I am not a fan of any spring loaded movable...
  11. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Roterjager - 375 We should be able to push the 361s at 3500 fps without stressing the primer pockets and 400s at 3350 fps as well and being kind to the brass as well. I will know where we are in a week or so with actual speeds but the estimates are fair and forgiving. JD04 for practice and...
  12. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Yes, it opens up many options for down the road. Bolt side
  13. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Not sure how the shoot ended up I had to attend a fund raiser this afternoon. Next week will seem like x-mas in my house when I'm able to get home, some cool stuff showing up to work with.
  14. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    You healing up well Geno? Oneshot
  15. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Folks Maybe some of this will help in folks getting more consistent impacts down range. Always depend on Quality ammo with low ES numbers. A good Balistics program that is not free - so many people go cheap on the most important part of the program after spendings $$$ on their rifle, Then...
  16. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    I did not look at the format on this shoot but just to throw a little out there for those that might like the info. If they force you to do all of your functions in the light of the night, practice at home in your dark room with getting your balistics app lighting tamed down and work at setting...
  17. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Nice looking setup there Geno. Pretty serious looking gadget up front on it. Oneshot
  18. oneshot.onehit

    Hyper Stabilized Bullets - Jim Boatright

    Just a little something we have been using in a 35" MTU barrel in a 375 pushing solids and with good results the last year. 16 to 7.7
  19. oneshot.onehit

    2018 Wisconsin Events and Shooting thread

    Good shooting everyone, it was a good time and camaraderie, thanks Geno for bringing in some new folks to the sport. I hope you and your truck full and Merc made it home safe in the snow. Cheers Oneshot
  20. oneshot.onehit

    Any new changes to the Atlas 5H this year

    Just curious if there has been any changes or improvements built into the Atlas 5H bipod for 2018 that would benefit the large heavy frame 375s and up? Cheers JH oneshot.onehit
Top Bottom