Search results

  1. T

    Left Bolt / Right Port Manners T2AGAP w/Mini-Chassis & Factory Installed Area 419 Arca Rail

    T2AGAP Standard Fill MCS-DBM SHORT ACTION MINI CHASSIS (GEN 2) TL3 Inlet (Should fit any LB/RP short action. Could fit a LB/LP by knocking down the left side with a mill. Gunsmith charged me $50 to do that on an MPA. Note that thumb shelf is on right side) MTU channel Orginally a 1" pad but...
  2. T

    Left Bolt / Right Port Manners T2AGAP w/Mini-Chassis & Factory Installed Area 419 Arca Rail

    T2AGAP Standard Fill MCS-DBM SHORT ACTION MINI CHASSIS (GEN 2) TL3 Inlet (Should fit any LB/RP short action. Could fit a LB/LP by knocking down the left side with a mill. Gunsmith charged me $50 to do that on an MPA. Note that thumb shelf is on right side) MTU channel Orginally a 1" pad but...
  3. T

    Un-fired...Nucleus/Mausingfield/Archimedes PVA 6.5x47 Shouldered Prefit $450/shipped

    Shouldered prefit by PVA 24" M24 Contour Button rifled Never fired $450 shipped CONUS Would trade for unfired TL3 shouldered prefits in .224 and 6mm chamberings. Only 6.5mm or 7mm trades would be for carbon fiber barrels with hunting type chambers (still short action), slightly fired ok there.
  4. T

    Weird First day with the Labradar

    Anyone ever experienced and troubleshot this? Summary version: Labradar wouldn't display shot data or advance shot number at the range but they are "somewhat" recorded on the SD card accessed via computer. Took the Labradar out for the first time today all amp'd up to shoot with it. Went...
  5. T

    Does Factory Set Parallax Matter on 1-4 Scopes Under 100yds??

    So I’ve started playing around with a crossbow just for fun. Having long range shooting as a hobby, I’m naturally wanting to push the limits with the crossbow as well. My current scope was just part of the whole bow package. It’s one of the cheapos where you dial the mag ring to the FPS and...
  6. T

    Off-brand ARCA Plates?

    There are a ton of these on Amazon. Anyone have a favorite one they go with? Just looking at the plates with 1/4 or 3/8 mounting screws.
  7. T

    Well I found Where All the RL26 is Hiding...

    Ally Outdoors Midland,TX
  8. T

    Extra prep necking down 6.5 creedmoor to 6?

    Does necking down from 6.5 to 6 result any additional brass prep? Turning necks, trimming, etc.?
  9. T

    FX-120i calibration weight; Does grade/class really matter?

    I was about to order an F1 class calibration weight on ebay after watching a youtube video on scale calibration. Started thinking about it, does that really matter for our purposes since we all do load workup and look for signs of pressure along the way? It's really just a relative measurement...
  10. T

    Trijicon Win Model 70SA 7” Military F-1913 Steel Rail

    Brand new. $80 shipped. PayPal or USPS money order. Would trade for unmodified aiaw mag
  11. T

    Warne 20moa Rail for Sako TRG 22 & 42

    $80 shipped. PayPal or USPS money order. Brand new.
  12. T

    Trimmer Alternative to the Giraud?

    Before I pull the trigger on an electric trimmer, are there any other comparable units out there?
  13. T

    WTs: PVA Nucleus/Archmedes/Mausingfiled 6.5x47 Lapua Shouldered prefit

    Everything is unfired. The action has been in a stock and scope mounted for dry fire practice, so maybe a little edge wear in places. Unfired PVA 6.5 Creedmoor barrel - button. This was not purchased as a barreled action, but PVA did mount this barrel. I would like to keep the suppressor...
  14. T

    SoldNew Ruger RPR Prefit Criterion 6MM Creed Replacement Barrel - $325

    Brand new 26" Palma Contour 6MM Creedmoor Match Chamber Threaded 5-8/24 This barrel.
  15. T

    Which Dillon Case Feeder for Amp Annealer Mate?

    550, 650, or either?
  16. T

    Chamfer and deburr case mouths on every reloading?

    Should this be done every time or just when trimming? I always do it to virgin brass and had planned on redoing just when trimming. The inside chamfer on my 1x brass looks less obvious than I thought it would.
  17. T

    Having to bump shoulders back on new Lapua to chamber??

    Would this concern you about the chamber being too short? I’m having to bump the shoulder back on virgin 6.5creed Lapua brass .004-.005 to get no resistance on bolt close. Getting the resistance on factory ammo as well. Just though I’d ask before resizing 400 pieces since I haven’t...
  18. T

    TA-3 leveling heads are in-stock at RRS

    Just a heads up since it seems like they are always back ordered. Use holiday18 code displayed at the top of their page for free shipping as well. The 2.5” and 4” were oth in stock when I ordered.
  19. T

    WTT: New Criterion 6creed RPR barrel for Spuhr 4002/4006

    New replacement barrel for a RPR. Want to trade for a 34mm 1.35” or 1.5” 0moa Spuhr mount
  20. T

    Traded

    Barloc is for shouldered barrels and is brand new. I ended up building two rifles so I don’t see myself needing to switch barrels that often. Would like to trade for a Nucleus action wrench and a AICS 5rd magazine (.308 pattern).