Search results

  1. phillip61

    Accuracy 1st civilian training?

    https://www.drlongrangeconcepts.com/ I went here. These guys are awesome. great class
  2. phillip61

    Difference between Club matches vs. PRS sanctioned

    At our club matches we have two minutes per stage, where as in the two day big boy matches I hear you have one minute thirty seconds.
  3. phillip61

    what power do most of you guys use @ PRS style matches?

    my next question would be with say just your rifle resting on a game changer bag, what is the best way to steady your rifle when you get behind it?
  4. phillip61

    what power do most of you guys use @ PRS style matches?

    went and bought me an egg timer and went to the range today. Turned my power down to about 12X , I put 90 seconds on the clock. The first thing I did was do a few dry runs on the clock. I could really tell right off the bat I was faster. I probably did the dry runs for about 45 minutes. Then I...
  5. phillip61

    Schmidt and Bender: is it time to cut my losses

    I would get the new IOR Recon Gen II. Awesome scope. You won't never have to worry about sending it back.
  6. phillip61

    Valdada IOR Scopes? Are their scopes any good?

    I guess I've been lucky. I got a 3.5-18 on a custom 308. A Terminator on my F-class rig, and the new Recon Gen II on my PRS rig. Never had an issue with a single one of them. The 3.5-18 is 7-8 years old, the terminator is 6 years old. All I hear is all these horror stories. I don't doubt what...
  7. phillip61

    what power do most of you guys use @ PRS style matches?

    The one stage I did really well on was 2 shots each @ 300, 350, 400, 500, 600. I set my dope for 400 and used my ret. for hold under and over for the other shots and I went 9 for 10 . I been practicing using my ret. and I was pleased how that stage turned out.
  8. phillip61

    what power do most of you guys use @ PRS style matches?

    I'm always up around 25X and I'm beginning to think that is hurting me. I'm watching these other guys and they are getting their shots off way faster than I am. I think its because it's taking me to long to get settled in on the target. I mean my center dot is moving all over the place and it...
  9. phillip61

    pants?

    An old pair of BDU's is what I wear.
  10. phillip61

    Bolt not picking up rounds from Magazine?

    that's what I was thinking, it wouldn't need to be but maybe an 1/8" or so.
  11. phillip61

    Bolt not picking up rounds from Magazine?

    I don't know what a binder plate is?
  12. phillip61

    Bolt not picking up rounds from Magazine?

    yes, a little. and it did seem to help. But afterword I got the idea of glueing something on the front edge of the mag. that would keep the rounds at a slight angle.
  13. phillip61

    Bolt not picking up rounds from Magazine?

    I watched the video and believe I have it adjusted the correct way. it will cycle through a whole mag, without messing up. It just won't do it every time. The times that it don't when I look in it, The reason it won't is because a round is setting to "flat". I then have to put my finger in and...
  14. phillip61

    Bolt not picking up rounds from Magazine?

    its a J. Allen Chassis, Remington 700 action, 6.5CM. the magazine brand is called "Accurate-Mag". Just got the chassis, this weekend was my 1st trip to the range. I watched the video about getting your mag. set and stuff for the chassis. The problem to me (and I could be dead ass wrong) is...
  15. phillip61

    Bolt not picking up rounds from Magazine?

    It will "most" of the time, but there are others it won't. When it won't it's because the shells are to perpendicular to the magazine (not pointing at a slightly upward angle). I have to put my finger in there and push down on the back end of the round. What is a good fix for this? some have...
  16. phillip61

    Got my new J. Allen Chassis

    I have, I'm for sure no expert on the subject but I think it's more an issue on how the rounds are sitting in the magazine. there are times I can cycle the bolt completely through all the rounds in the Mag. Then the next time I may have to put my finger in there twice to push down on the back of...
  17. phillip61

    Got my new J. Allen Chassis

    got to the range this weekend, I really like the chassis. One question, if the rounds in the magazine feed perfectly then there is no problem, but sometimes the rounds or at least the top round will not be pointing up enough and the bolt will not close. I have to put my finger in there and push...
  18. phillip61

    Got my new J. Allen Chassis

    I had zero waiting time. I ordered it one day, it arrived three days later.
  19. phillip61

    Got my new J. Allen Chassis

    , Haven't been to the range yet, but I believe I'm gloing to like this thing thing.