Recent content by flyfisherman246

  1. F

    Does anyone have a 7 WSM reamer?

    I'm not looking to ring out the last fps out of this. I'm just trying to get closer to the lands at mag length than I'm at now. It is for a hunting rifle, so single shot isn't what I'm looking for. I really like bergers for hunting and am trying to stick with them. Thanks for the advice.
  2. F

    Does anyone have a 7 wsm reamer?

    I posted this in the gunsmithing section and there weren't many views so I figured I'd try it here. I'm looking for one as soon as possible. I have looked everywhere to try to find a saami spec 7 WSM reamer. I am looking to shoot a 180 berger hybrid at 2.950" oal. From on rental place we got...
  3. F

    Does anyone have a 7 WSM reamer?

    Thanks for the reply. I had a .055 freebore used and it gave me about 3.010 oal, so I'm guessing a .000 would get me around 2.950. The reason I'm looking for that length is not for the brass but for the wyatts extended center feed mag box. If I were to start this over, I would have went 7...
  4. F

    Does anyone have a 7 WSM reamer?

    I have looked everywhere to try to find a saami spec 7 WSM reamer. I am looking to shoot a 180 berger hybrid at 2.950" oal. From on rental place we got what was supposed to be a .000 freebore reamer but it ended up being 3.050" oal touching with a 180 hybrid. And been trying to contact 4D...
  5. F

    Anyone know what happened in this ladder?

    That seating pressure makes a lot of since. However, I am not willing to go through all that effort for what I do. I shoot rocks and steel and like to shoot 100-200 rounds a week in the summer time. I shoot in prs matches, and I long range hunt. I just shoot too much to be worried about all...
  6. F

    Anyone know what happened in this ladder?

    The brass is neck turned and using a redding bushing to size down 2 thou. I usually anneal after the third firing so it should be pretty factory like at 2 firings. This should be pretty consistent neck tension, shouldn't it? Thanks again for all the help
  7. F

    Anyone know what happened in this ladder?

    I went out yesterday to reconfirm accuracy at 100 yards and chrono. Fired 6 rounds over the chrono and the es was 24. The accuracy great. All rounds touching. One 3 shot group was in the .1's. Not too happy with the es's though. Thinking about trying the same thing with 43.5 and seeing if...
  8. F

    Anyone know what happened in this ladder?

    Also forgot to mention, I came up .2 mils after the 43.0 group.
  9. F

    Anyone know what happened in this ladder?

    Thanks so much for all the help. I really do appreciate all the advice. I went out today with 43.0- 44.8 and shot 4 shot groups. Once again its all contradicting itself. The best group today was at 43.6 but looking at the velocities, that was right between the node of the first time firing...
  10. F

    Anyone know what happened in this ladder?

    Forgot to mention the barrel had about 40 round through it since it was cleaned last also. So not an issue of clean vs dirty bore.
  11. F

    Anyone know what happened in this ladder?

    In Montana. 17 degrees isn't that far from normal a lot of the year. (Have hunted and shot in 40 degrees colder) The barrel is pretty new, but it has been broken in and not copper fowling. It has about 150 rounds through it.
  12. F

    Anyone know what happened in this ladder?

    I ran (2) 10 shot ladder test with my .308 watching the magneto speed. Not sure if anyone has done this 10 round ladder test as seen in this video. But as you can see, the first time I ran through it (column on the left) there seems to be a velocity flat line between 43.0 and 43.6. There...
  13. F

    Lmt MWS .260 Bartlein

    Anybody interested? Any offers?